矩形窄通道内带纵向涡发生器的传热强化

WANG Ling; CHEN Qiuyang; ZENG Min; ZHOU Yangeng; WANG Qiuwang; HUANG Yanping; XIAO Zejun

您当前的位置：

首页 >

文章列表页 >

矩形窄通道内带纵向涡发生器的传热强化

更新时间：2025-12-10

- 矩形窄通道内带纵向涡发生器的传热强化
- CIESC Journal Issue 11, (2006)
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：25 November 2006，
  
  Published：25 November 2006
- 稿件说明：
移动端阅览
WANG Ling, CHEN Qiuyang, ZENG Min, et al. 矩形窄通道内带纵向涡发生器的传热强化[J]. CIESC Journal, 2006, (11).
DOI：

WANG Ling, CHEN Qiuyang, ZENG Min, et al. 矩形窄通道内带纵向涡发生器的传热强化[J]. CIESC Journal, 2006, (11). DOI：

摘要

对带有纵向涡发生器的水平矩形窄通道内水的强化传热与阻力特性进行了实验研究，得出了Re在3000～20000(过渡区和湍流区)范围内纵向涡发生器不同安装形式对水的流动与换热特性的影响规律.结果表明：带纵向涡发生器(LVGs)的通道比光通道的传热因子j提高了25％～55％，同时阻力有所增加.在3种不同比较准则(相同泵功、相同压降及相同质量流量)条件下，两侧安装有交叉方向LVGs的通道换热效果较好，顺流方向换热效果略好于逆流方向.

Abstract

The heat transfer and fluid flow in a horizontal rectangular narrow channel with longitudinal vortex generators (LVGs)mounted on side-walls were studied experimentally.The effect of the form of mounting LVG on heat transfer and fluid flow performance was also investigated with Reynolds number ranging from 3000 to 20000.The LVGs were able to improve the Colburn factor j by 25％—55％ at the expense of increased pressure drop.A comparison of thermal performance was made under three constraints (identical mass flow—IMF

identical pressure drop—IPD and identical pumping power—IPP).The heat transfer performance of the channel with different direction LVGs mounted on two sidewalls was better than that of other tested channels

and the heat transfer performance of parallel-flow was a little better than that of counter-flow.

关键词

Keywords

references

Views

410

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study on entropy wave production and dissipation in partially premixed swirl flames subject to inlet perturbations

Engineering verification and NO emission control of rare earth Y2O3-based catalytic coatings on a metal fiber surface burner

A hybrid modeling and optimization strategy for sequential simulated moving bed

Prediction of biomass pyrolysis product yield based on machine learning algorithms

Recent advances in machine learning for modeling and control of crystallization processes

Related Author

No data

Related Institution

No data

⁰