Parameter estimability analysis for process system with finite measurement information

ZHANG Zhengjiang; SHAO Zhijiang

您当前的位置：

首页 >

文章列表页 >

Parameter estimability analysis for process system with finite measurement information

更新时间：2025-12-10

- Parameter estimability analysis for process system with finite measurement information
- CIESC Journal Issue 2, Pages: 433-438(2011)
- 作者机构：
  
  1. 浙江大学工业控制技术国家重点实验室，工业控制研究所
  2. 温州大学物理与电子信息工程学院
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：05 February 2011，
  
  Published：05 February 2011
- 稿件说明：
移动端阅览
ZHANG Zhengjiang, SHAO Zhijiang. Parameter estimability analysis for process system with finite measurement information[J]. CIESC Journal, 2011, (2): 433-438.
DOI：

ZHANG Zhengjiang, SHAO Zhijiang. Parameter estimability analysis for process system with finite measurement information[J]. CIESC Journal, 2011, (2): 433-438. DOI：

摘要

实时优化与过程对象模型的精确程度有关。如果过程对象模型与实际模型偏差较大，则会引起优化结果与过程实际的最优结果不一致，并导致优化的效率降低。在实时优化中应采用参数估计，调整过程对象模型的参数，从而保证过程对象模型与实际模型相一致或偏差最小。基于系统可估计性定义，本文根据有限测量信息的参数估计问题特点，提出了系统的参数可估计性定义；通过分析线性系统与非线性系统，指出系统具有参数可估计性的充分条件；并分析了如果系统不具有参数可估计性时，则需要固定哪些参数才能使得整个系统具有参数可估计性。最后分析了当测量变量有多组测量时对系统参数可估计性的影响，通过线性与非线性实例验证了分析结果的有效性。

Abstract

The economic performance of real-time optimization system is influenced by the accuracy of the model.If the process model deviates from the process plant

it would lead to the offset between the true plant optimum and the predicted optimum and decrease the efficiency of real-time optimization.So it is important to use parameter estimation to make sure the least deviation of the optimum from the true plant.The definition of parameter estimability is proposed for parameter estimation problem with finite measurement information based on the definition of system estimability.The necessary conditions for parameter estimability are stated in both linear and nonlinear systems based on matrix analysis.If the parameters of system are inestimable

the parameter estimability can be changed by fixing some of the modelparameters.The relationship between parameter estimability and the number of data sets is discussed.The effectiveness of the proposed analysis can be demonstrated by the results of linear and nonlinear systems.

关键词

Keywords

references

Views

247

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Multi-objective optimization based on hybrid genetic algorithm for naphtha catalytic reforming process

Algae growth modeling based on optimization theory and application to water-bloom prediction

Real-time optimization method MEO based on mnemonic enhancement

Inverse analysis to estimate thermal conductivity components of orthotropic medium

Operation optimization of distillation column based on reduced SQP algorithm and hybrid derivative method

Related Author

ZHAO Yingkai

HOU Weifeng

LU Jingui

LI Hongliang

LIU Zaiwen

WU Qiaomei

WANG Xiaoyi

CUI Lifeng

Related Institution

南京工业大学自动化学院

浙江大学智能系统与控制研究所，工业控制技术国家重点实验室

北京工商大学信息工程学院

北京工商大学化学与环境工程学院

重庆大学动力工程学院

⁰