板式换热器冷却水污垢热阻预测的偏最小二乘回归法

徐志明; 文孝强; 郑娇丽; 郭进生; 黄兴

您当前的位置：

首页 >

文章列表页 >

板式换热器冷却水污垢热阻预测的偏最小二乘回归法

更新时间：2025-12-10

- 板式换热器冷却水污垢热阻预测的偏最小二乘回归法
- CIESC Journal Issue 6, Pages: 1531-1536(2011)
- 作者机构：
  
  1东北电力大学能源与动力工程学院，2华北电力大学能源与动力工程学院
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：05 June 2011，
  
  Published：05 June 2011
- 稿件说明：
移动端阅览
徐志明, 文孝强, 郑娇丽, et al. 板式换热器冷却水污垢热阻预测的偏最小二乘回归法[J]. CIESC Journal, 2011, (6): 1531-1536.
DOI：

徐志明, 文孝强, 郑娇丽, et al. 板式换热器冷却水污垢热阻预测的偏最小二乘回归法[J]. CIESC Journal, 2011, (6): 1531-1536. DOI：

摘要

搭建板式换热器冷却水污垢热阻实验台，测得不同时间、流速和温度下天然循环冷却水（松花江水）中铁离子、氯离子、细菌总数、pH值、溶解氧、浊度、电导率等水质参数，随机取一组实验的水质参数作为输入变量，建立换热器冷却水污垢热阻预测的偏最小二乘回归模型，对板式换热器的污垢热阻进行预测。整个实验过程中，热水进口温度为43.5～44.5℃，冷却水进口温度为21.5～22.5℃，流速为0.104 m·s-1，当温度和流速发生变化时，则重新采取数据。经过计算，确立本模型应提取4个潜变量，由此建立了板式换热器冷却水污垢热阻预测模型。预测结果和实验结果最大相对误差在5.11%以内。结果表明偏最小二乘回归算法的污垢模型预测精度高，所建预测模型是合理可行的。

Abstract

A fouling test system was set up to measure water quality parameters of natural cooling water circulation from Songhua river

such as iron ions

chloride ions

total bacteria

dissolved oxygen

turbidity and electric conductivity at different time

flow rates and water temperatures.A partial least squares regression(PLS)model was built

with a set of data measured as the input variables

to predict the fouling characteristics of the plate heat exchanger

which are iron ions

chloride ions

total bacteria

dissolved oxygen

turbidity

conductivity

etc.The input water quality parameters were selected randomly.In the experiment

the hot water inlet temperature was between 43.5℃ and 44.5℃

cooling water inlet temperature was between 21.5℃ and 22.5℃

and water velocity was 0.104 m·s-1.The calculation shows that the PLS model contains four latent variables.Compared with the experimental results

the maximal relative error of the model was in 5.11%.The partial leastsquare regression algorithm of fouling model is reasonable and feasible.

关键词

Keywords

references

Views

287

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Relationship between water quality parameters and fouling in plate heat exchangers

Fouling characteristics of sintered porous surface tubing

NEW GROUP CONTRIBUTION METHOD FOR ESTIMATING AVERAGE BOILING POINT OF HEAVY OIL FRACTIONS

Mixed matrix membranes based on nitrogen-rich Schiff base network polymer and their CO2 separation performance

Study on microstructure of NaCl solution ice centrifugal separation based on Micro-CT and deep learning

Related Author

XU Zhiming

GUO Jinsheng

HUANG Xing

ZHANG Zhongbin

LIU Along

XU Hong

SUN Yan

XU Jiayin

Related Institution

东北电力大学能源与动力工程学院

华东理工大学机械与动力工程学院，化学工程联合国家重点实验室

石油大学（北京）重质油国家重点实验室

⁰