Preparation and characterization of desulfurizer loaded on attapulgite
|更新时间:2025-12-10
|
Preparation and characterization of desulfurizer loaded on attapulgite
CIESC JournalIssue 5, Pages: 1319-1324(2010)
作者机构:
1. 南京理工大学国家特种超细粉体工程技术研究中心
2. 江苏工业学院化学化工学院
3. 江苏工业学院机械与能源工程学院
作者简介:
基金信息:
DOI:
CLC:
Online First:05 May 2010,
Published:05 May 2010
稿件说明:
移动端阅览
ZHANG Zhihong, ZHANG Shaoyu, LIU Xuedong, et al. Preparation and characterization of desulfurizer loaded on attapulgite[J]. CIESC Journal, 2010, (5): 1319-1324.
DOI:
ZHANG Zhihong, ZHANG Shaoyu, LIU Xuedong, et al. Preparation and characterization of desulfurizer loaded on attapulgite[J]. CIESC Journal, 2010, (5): 1319-1324.DOI:
Preparation and characterization of desulfurizer loaded on attapulgite
Fe/attapulgite and Zn/attapulgite desulfurizer were prepared by loading Fe and Zn element on attapulgite by precipitation.The desulfurizers were characterized by XRD,TEM and TPR.The stability of desulfurizers in ammonia water and hydrochloric acid was studied.Additionally,the changes of concentration of H2S in the off-gas were investigated in the sweetening process and the desulfurization capacities of two desulfurizers were compared.The influence of grain size,load amount and self-regeneration times on desulfurization capacity of Fe/attapulgite was studied.The results showed that active components were loaded on the surface of attapulgite uniformly.Fe/attapulgite had good desulfurization capability and self-reset capability,and its desulfurization capacity was 120 times that of active carbon and 7.67 times that of Zn/attapulgite.Decrease of grain size and increase of load amount could increase desulfurization capacity but regeneration by itself could only recover part of desulfurization capacity.Fe/attapulgite desulfurizer has wide application as a good desulfurizer.
Behavior of zinc-based sorbents for simultaneous removal of H2S and COS from high-temperature coal gas and effect of Mo/Ni additives on desulfurization behavior
Construction of carbon nano-onions/ZnO composite cathode interfacial layers and their photovoltaic performance
ZnO-GA anode with gradient-pore distribution for lithium-ion battery
Preparation of C/ZnO composite based on camellia oleifera shell and its application in lead carbon battery
Electrochemical performance of Li3VO4 modified Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode materials
Related Author
GAO Lianghao
ZHANG Xiaofen
DUAN Xinwei
MI Jie
WANG Jiancheng
WU Mengmeng
MU Fumao
MA Wenhao
Related Institution
State Key Laboratory of Clean and Efficient Coal Utilization, Taiyuan University of Technology
Key Laboratory of Coal Science and Technology, Ministry of Education, Taiyuan University of Technology
College of Environmental and Ecology, Taiyuan University of Technology
College of Materials Science and Engineering, Taiyuan University of Technology
Zheda Institute of Advanced Materials and Chemical Engineering