Optimization and diffusion model for acetylene slow-release in compound matrix
|更新时间:2025-12-10
|
Optimization and diffusion model for acetylene slow-release in compound matrix
CIESC JournalIssue 5, Pages: 1307-1312(2010)
作者机构:
1. 重庆理工大学化学与生物工程学院
2. 同济大学污染控制与资源化研究国家重点实验室
作者简介:
基金信息:
DOI:
CLC:
Online First:05 May 2010,
Published:05 May 2010
稿件说明:
移动端阅览
ZHANG Lijie, ZHAO Tiantao, ZHAO Youcai, et al. Optimization and diffusion model for acetylene slow-release in compound matrix[J]. CIESC Journal, 2010, (5): 1307-1312.
DOI:
ZHANG Lijie, ZHAO Tiantao, ZHAO Youcai, et al. Optimization and diffusion model for acetylene slow-release in compound matrix[J]. CIESC Journal, 2010, (5): 1307-1312.DOI:
Optimization and diffusion model for acetylene slow-release in compound matrix
The slow-release inhibitors were prepared based on the technology of bio-inhibition on methanogens and slow-release.The process optimization on release of acetylene and Ca2+ was carried out
and it was found that when the ratio of calcium carbide to paraffin wax was 1∶1 and the diameter of slow-release inhibitor was 10 mm
the release time was longer.Additionally
the inhibitor coated with cellulose acetate (CA) had better effect on slow-release.The ratio of release reached 28.42% after releasing 145 d with the content of rosin 20%.Empirical diffusion formula of Sinclair & Peppas can describe the release process well.Moreover
a mechanism model was derived based on the Higuchi model and the diffusion coefficients were acquired.