Application of spherical agglomerate model in PEMFC process simulation
|更新时间:2025-12-10
|
Application of spherical agglomerate model in PEMFC process simulation
CIESC JournalIssue 10, Pages: 2694-2702(2010)
作者机构:
1. 上海交通大学化学工程系
2. 上海应用技术学院材料系
作者简介:
基金信息:
DOI:
CLC:
Online First:05 October 2010,
Published:05 October 2010
稿件说明:
移动端阅览
WU Xi, ZHANG Dongyun, JIANG Qizhong, et al. Application of spherical agglomerate model in PEMFC process simulation[J]. CIESC Journal, 2010, (10): 2694-2702.
DOI:
WU Xi, ZHANG Dongyun, JIANG Qizhong, et al. Application of spherical agglomerate model in PEMFC process simulation[J]. CIESC Journal, 2010, (10): 2694-2702.DOI:
Application of spherical agglomerate model in PEMFC process simulation
A two-dimensional full cell mathematic model for PEMFC with conventional parallel flow field was developed.In this model
the transport of the two charged species
electrons and ions
as well as that of the chemical species in MEA was considered.The model treated the catalyst layers as spherical agglomerates of polymer electrolyte coated catalyst particles.Different parameters for polymer electrolyte content in agglomerate and catalyst layer porosity were employed under different cell voltage.The polarization curves predicted at base case by the model agreed well with the published experimental data.Profile of chemical species and current density within MEA in running state was investigated respectively.The influences of pressure and sizes of Pt particles in catalyst on the fuel cell performance were also investigated.The simulation results showed the mass transport and reaction phenomena in MEA
suggested that water draining at cathode and gas humidification at anode is important to maintain the performance of single cell.The results indicated that high pressure of cathode inlet gas was good for PEMFC single cell performance
especially running under low cell voltage.It also indicated that within the same Pt loading
the fuel cell performance is better at smaller Pt particle size.