Model and design of through-hole capillary burst valve for capillary driven flow

DU Xin; ZHANG Ping; LIU Yongshun; WU Yihui

您当前的位置：

首页 >

文章列表页 >

Model and design of through-hole capillary burst valve for capillary driven flow

更新时间：2025-12-10

- Model and design of through-hole capillary burst valve for capillary driven flow
- CIESC Journal Issue 10, Pages: 2529-2534(2010)
- 作者机构：
  
  1. 长春光学精密机械与物理研究所应用光学重点实验室
  2. 中国科学院研究生院
  3. 长春理工大学机电工程学院
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：05 October 2010，
  
  Published：05 October 2010
- 稿件说明：
移动端阅览
DU Xin, ZHANG Ping, LIU Yongshun, et al. Model and design of through-hole capillary burst valve for capillary driven flow[J]. CIESC Journal, 2010, (10): 2529-2534.
DOI：

DU Xin, ZHANG Ping, LIU Yongshun, et al. Model and design of through-hole capillary burst valve for capillary driven flow[J]. CIESC Journal, 2010, (10): 2529-2534. DOI：

摘要

根据接触线理论建立了通孔形毛细管被动阀的物理模型，分析了实际加工通孔时带来的扩张角对毛细管被动阀性能的影响，并推导出相应的成立条件。指出被动阀的有效性与液体对壁面的动态接触角、前进接触角和通孔的扩张角有关，实验结果验证了上述结论。根据实验结果，提出了简化的一维模型，用于通孔微阀的设计。通过数值模拟，得到一种新型的收缩形通孔微阀，当来流通道大于4 mm时，微阀有效性不受来流和通孔扩张角大小影响，降低了对通孔的加工要求。去离子水实验表明，当来流毛细数高达4.0×10-3，高度为20 μm的微阀仍有效。

Abstract

A model of through-hole capillary burst valve (CBV)is provided with the theory of contact line.The CBV is affected by the dynamic contact angle

expansion angle and advanced contact angle.The requirement for the model is confirmed by the experiment and numerical simulation.Based on the experimental data

a one-dimension model is presented to design the CBV where the flow is perpendicular to the coming flow channel.A new convergent through-hole CBV is designed.When the length of the coming flow channel is larger than 4mm

the CBV is not affected by the degree of the expansion angle of CBV.The experiment with deionized water shows that the CBV with 20 μm height still works well when the capillary number is as high as 4.0×10-3.The CBV designed has the merit that it is easier to meet the requirement for manufacturing the expansion angle of the through-hole.

关键词

Keywords

references

Views

221

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Surface modification of sugar cane bagasse with aluminate ester strengthened by mechanical activation

Energy analysis for transition from Cassie state to Wenzel state

Hot water treatment of low rank coal in high temperature and high pressure reactor and its slurry ability

Characteristics of evaporating thin film interline region of extended meniscus in capillary microstructure

Hybrid FC/ZnO materials prepared by RF sputtering and their basic properties

Related Author

JIANG Daohai

HU Huayu

WANG Nan

HUANG Zuqiang

CHEN Darong

WANG Jiadao

SUI Tao

CAO Xiaozhe

Related Institution

广西大学化学化工学院

清华大学精密仪器与机械学系，摩擦学国家重点实验室

能源清洁利用国家重点实验室(浙江大学)

华北电力大学能源的安全与清洁利用北京市重点实验室

青岛大学化学化工学院

⁰