Preparation and characterization of Pt/WC catalyst for oxygen reduction at gas-diffusion electrod
|更新时间:2025-12-10
|
Preparation and characterization of Pt/WC catalyst for oxygen reduction at gas-diffusion electrod
CIESC JournalIssue 10, Pages: 2633-2639(2009)
作者机构:
1. 浙江工业大学化学与工程材料学院,绿色化学合成技术国家重点实验室培育基地
2. 英国女王大学化学化工学院
作者简介:
基金信息:
DOI:
CLC:
Online First:05 October 2009,
Published:05 October 2009
稿件说明:
移动端阅览
MA Chun’an, HUANG Yun, ZHU Yinghong, et al. Preparation and characterization of Pt/WC catalyst for oxygen reduction at gas-diffusion electrod[J]. CIESC Journal, 2009, (10): 2633-2639.
DOI:
MA Chun’an, HUANG Yun, ZHU Yinghong, et al. Preparation and characterization of Pt/WC catalyst for oxygen reduction at gas-diffusion electrod[J]. CIESC Journal, 2009, (10): 2633-2639.DOI:
Preparation and characterization of Pt/WC catalyst for oxygen reduction at gas-diffusion electrod
By using spray-drying treated ammonium metatungstate (AMT) as precursor
the hollow globular tungsten carbide (WC) catalysts were prepared by sphere miniaturation-gas-solid reaction
and then the catalysts Pt/WC and Pt/C were prepared by reduction of platinum salts with HCHO in H2O solvent.The size of Pt metal particles in both catalysts was characterized by XRD and SEM
and the results indicated that Pt metal particles were 10.6 nm in Pt/WC while they were 2.8 nm in Pt/C. The measured polarisation curves of oxygen reduction reaction (ORR) in the gas diffusion electrode showed that Pt/WC oxygen-diffusion electrode exhibited a better electro-catalytic properties than Pt/C in acid solution
as shown by the higher current density at the same potential and initial potential of oxygen reduction positive.Then the possible reason and electro-catalytic mechanism were discussed
and the AC impedance spectra of gas diffusion electrode with Pt/WC under the controlled conditions were also studied.