Preparation of P-mSA/mCS bipolar membrane and its application in electrosynthesis of 2,3,5,6-tetrachlopyridine
|更新时间:2025-12-10
|
Preparation of P-mSA/mCS bipolar membrane and its application in electrosynthesis of 2,3,5,6-tetrachlopyridine
CIESC JournalIssue 2, Pages: 525-530(2010)
作者机构:
福建师范大学化学与材料学院
作者简介:
基金信息:
DOI:
CLC:
Online First:05 February 2010,
Published:05 February 2010
稿件说明:
移动端阅览
XIAO Yanchun, CHEN Riyao, ZHENG Xi, et al. Preparation of P-mSA/mCS bipolar membrane and its application in electrosynthesis of 2,3,5,6-tetrachlopyridine[J]. CIESC Journal, 2010, (2): 525-530.
DOI:
XIAO Yanchun, CHEN Riyao, ZHENG Xi, et al. Preparation of P-mSA/mCS bipolar membrane and its application in electrosynthesis of 2,3,5,6-tetrachlopyridine[J]. CIESC Journal, 2010, (2): 525-530.DOI:
Preparation of P-mSA/mCS bipolar membrane and its application in electrosynthesis of 2,3,5,6-tetrachlopyridine
Phosphorylated sodium alginate (P-SA) membrane was synthesized from phosphorus pentaoxide
triethyl phosphate and phosphoric acid
and then modified by ferrocene as a linking reagent. Chitosan(CS) was modified by acetylferrocene. P-ferrocene-SA/acetylferrocene-CS bipolar membrane was prepared with a paste method
and was named as P-mSA/mCS BPM. The bipolar membrane was characterized by charge density
H+ permeability
impedance
I-V curves and SEM. Zinc/nickel layer was plated down to the surface of cation exchange layer to realize zero polar distance electrolysis in the cathode room. The experimental results showed that 2
3
5
6-tetrachlopyridine (2
3
5
6-TCP[BFQ]) was electrocatalytically synthesized at the bipolar membrane by degradation of pentachloropyridine.The current efficiency was 70.1%
yield of 2
3
5
6-TCP was 96%
when the current density was 30 mA·cm-2. Compared with the traditional Zn reduction method
the electro-reduction technology saved the zinc powder and eliminated the pollution to the environment.