以环氧氯丙烷、三乙胺盐酸盐为原料,采用微波辐照合成3-氯-2-羟丙基三乙基氯化铵(CTA)。利用乙酸乙酯和乙醇混合溶液反复结晶提纯后,采用薄层色谱与化学滴定方法定性、定量分析产物纯度达到99%以上,使用红外吸收光谱、核磁共振对目标产物的结构进行分析鉴定;研究了微波功率、反应温度、反应时间和摩尔比对CTA合成产率的影响,从而得出CTA的最佳微波合成条件为:微波功率300 W
3-chlorine-2-hydroxypropyl triethyl ammonium chloride (CTA) was synthesized with epichlorohydrin
triethylamine muriate as raw materials under the irradiation of constant power microwave.Analysis by TLC and chemical titration indicated the purity of the product above 99.0% after the crystallization in the mixture of acetoacetate and ethanol.The structure of CTA was identified by IR and NMR.The factors which influenced the yield of CTA were investigated in terms of microwave power
reaction time
temperature and mole ratio of raw materials.Experimental results showed that the yield of CTA improved by 16.58% and the reaction time was 340 min shorter than the traditional method under the following reaction conditions: microwave power 300 W
50℃
mole ratio of raw materials 1.15∶1
reaction time 20 min.Finally the CMC
surface tension
Krafft point and melting point of the CTA were determined.