Preparation of high purity precipitated silica from iron ore tailings by molten salt method

YU Honghao; XUE Xiangxin; HE Yan; HUANG Dawei

您当前的位置：

首页 >

文章列表页 >

Preparation of high purity precipitated silica from iron ore tailings by molten salt method

更新时间：2025-12-10

- Preparation of high purity precipitated silica from iron ore tailings by molten salt method
- CIESC Journal Issue 8, Pages: 2124-2129(2009)
- 作者机构：
  
  1. 东北大学材料与冶金学院,辽宁,沈阳,110004
  2. 沈阳理工大学材料科学与工程学院,辽宁,沈阳,110168
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：05 August 2009，
  
  Published：05 August 2009
- 稿件说明：
移动端阅览
YU Honghao, XUE Xiangxin, HE Yan, et al. Preparation of high purity precipitated silica from iron ore tailings by molten salt method[J]. CIESC Journal, 2009, (8): 2124-2129.
DOI：

YU Honghao, XUE Xiangxin, HE Yan, et al. Preparation of high purity precipitated silica from iron ore tailings by molten salt method[J]. CIESC Journal, 2009, (8): 2124-2129. DOI：

摘要

以铁尾矿和NaOH为原料、NaNO3为熔盐，在500℃下煅烧3 h，使铁尾矿中的惰性SiO2转变成活性的硅酸钠相。以浸取硅酸钠溶液作为硅源，利用化学沉淀法成功制备了无定形白炭黑。用X射线衍射仪、红外光谱仪、透射电镜和X射线荧光光谱仪对制取白炭黑的物相结构、粒度形貌和成分含量进行分析。结果表明：白炭黑产品中的SiO2纯度为99.3%，化学结构为无定形的水合二氧化硅，形貌近似为球状粒子，粒径在100 nm左右。白炭黑的比表面积 (BET)为152 m2 8226;g-1。

Abstract

The iron ore tailings were mixed with NaOH-NaNO3 and calcined at 500℃ for 3 h to produce soluble sodium silicate.The iron ore tailings and NaOH were used as raw materials

and NaNO3 was used as molten salt.The precipitated silica particle was prepared by using sodium silicate as a source of silicon by the chemical precipitation method.The composition

morphology and structure of the synthesized particles were characterized by X-ray diffraction (XRD)

FTIR analysis

transmission electron microscopy (TEM) analysis

and X-ray fluorescence analysis (XRF).The SiO2 purity in the precipitated silica product was 99.3% by XRF.The chemical structure of precipitated silica was hydrated silicon oxide by FTIR analysis.The structure of precipitated silica was amorphous by XRD analysis.The TEM micrograph showed that the shape of precipitated silica particles was nearly spherical

and the average grain diameter was about 100 nm.The specific surface area was 152 m2 8226;g-1 by the BET method.

关键词

Keywords

references

Views

337

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Technology research on green metallurgy of high added value utilization of valuable elements in laterite nickel ore (Ⅰ) Preparation of silica white using molten NaOH extracting silicon method

Ecological utilization of oil shale by preparing silica and alumina

Research on the characterization of the molecular weight and its distribution of perfluoropolyether

Hydrolysis reaction mechanism of CNCl on the surface of composite metal CuCr2O4

Physics-informed spatio-temporal graph convolutional network for fermentation processes

Related Author

LIU Yan

ZHANG Xia

SHEN Xiaoyi

ZHAI Yuchun

XU Dong

LI Yong

FENG Zongyu

QIAO Guibo

Related Institution

No data

⁰