Silver recovery and cyanide removal from silver-plating wastewater using pulse-electrolysis

SU Yuanbo; LI Qingbiao; WANG Yuanpeng; WANG Haitao; HONG Jinqing

您当前的位置：

首页 >

文章列表页 >

Silver recovery and cyanide removal from silver-plating wastewater using pulse-electrolysis

更新时间：2025-12-10

- Silver recovery and cyanide removal from silver-plating wastewater using pulse-electrolysis
- CIESC Journal Issue 9, Pages: 2308-2313(2009)
- 作者机构：
  
  1. 厦门大学化学化工学院化学工程与生物工程系
  2. 厦门大学海洋与环境学院环境科学研究中心
  3. 厦门大学醇醚酯化工清洁生产国家工程实验室
  4. 福建省化学生物学省重点实验室
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：05 September 2009，
  
  Published：05 September 2009
- 稿件说明：
移动端阅览
SU Yuanbo, LI Qingbiao, WANG Yuanpeng, et al. Silver recovery and cyanide removal from silver-plating wastewater using pulse-electrolysis[J]. CIESC Journal, 2009, (9): 2308-2313.
DOI：

SU Yuanbo, LI Qingbiao, WANG Yuanpeng, et al. Silver recovery and cyanide removal from silver-plating wastewater using pulse-electrolysis[J]. CIESC Journal, 2009, (9): 2308-2313. DOI：

摘要

利用脉冲电源从含氰含银电镀废水中回收银和去除氰，对比了脉冲电源与直流电源对含氰镀银废水的处理效果，系统研究了脉冲电源的电解电压、占空比和脉冲频率等参数对电能消耗、银回收率和除氰率的影响。结果表明，脉冲电源较直流电源能更加有效降低阳极的超电位，减少电极的极化，从而降低槽电压，进而有效地降低电能消耗。脉冲电源的优化参数是：脉冲电压2.0 V，脉冲频率1200 Hz，占空比50%。在循环流速100 ml·min-1，pH值10～11，曝气速率1.0 L·min-1的实验条件下，通入电解电压2.0 V、脉冲频率1200 Hz以及占空比50%的脉冲电源，电解2.0 h后，银回收率高达99%，除氰率达到86%。

Abstract

The objective of the present study was to recover silver and remove cyanide from silver-plating wastewater using the novel pulse-electrolysis technique.The efficiency of silver recovery and cyanide removal

as well as power consumption was discussed in terms of pulse voltage

pulse duty factor

and pulse frequency.The optimum condition for silver recovery (99%) and cyanide removal (86%) was as follows: electrolysis voltage of 2.0 V

pulse duty factor of 50%

pulse frequency of 1200 Hz and electrolysis time of 2.0 h.In addition

compared with the conventional direct current electrolysis

the pulse-electrolysis technique showed such advantages of lower polarization of electrodes

lower over-voltage

and lower tank voltage.Thus

the presented method has a potential application for electroplating wastewater treatment.

关键词

Keywords

references

Views

330

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Advantages and risks of swirling cooling granulation towers

Analysis of flow field characteristics and mixing performance of different SK-type static mixers

Heat transfer mechanisms, bottleneck identification and optimization in heat exchanger networks under variable operating conditions

Multi objective optimization of flow and heat transfer characteristics of modified manifold microchannel heat sink based on machine learning

Thermal analysis of phase change suspension jet impinging on wall surface covered with variable-shape porous layer

Related Author

No data

Related Institution

No data

⁰