Optimization of boil-off gas recondensation process in LNG receiving terminal

YANG Zhiguo; LI Yajun

您当前的位置：

首页 >

文章列表页 >

Optimization of boil-off gas recondensation process in LNG receiving terminal

更新时间：2025-12-10

- Optimization of boil-off gas recondensation process in LNG receiving terminal
- CIESC Journal Issue 11, Pages: 2876-2881(2009)
- 作者机构：
  
  华南理工大学强化传热与过程节能教育部重点实验室
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：05 November 2009，
  
  Published：05 November 2009
- 稿件说明：
移动端阅览
YANG Zhiguo, LI Yajun. Optimization of boil-off gas recondensation process in LNG receiving terminal[J]. CIESC Journal, 2009, (11): 2876-2881.
DOI：

YANG Zhiguo, LI Yajun. Optimization of boil-off gas recondensation process in LNG receiving terminal[J]. CIESC Journal, 2009, (11): 2876-2881. DOI：

摘要

针对液化天然气（LNG）接收站的蒸发气体（BOG）再冷凝工艺系统能耗偏高的问题，对现有BOG再冷凝系统进行了工艺流程优化。通过对BOG压缩机入口温度、BOG压比及物料比等影响BOG再冷凝工艺能耗的主要运行参数的分析，提出了利用高压LNG预冷增压后的BOG，降低BOG压缩机压比的工艺流程。优化后的BOG再冷凝工艺较原工艺可节约BOG压缩机能量消耗32. 5％，且优化后的流程改善了LNG下游管网输气峰、谷负荷波动时的操作弹性，有较好的调峰功能。

Abstract

The recondensation system of boil-off gas (BOG) in LNG (liquefied natural gas) receiving terminal is simulated with software PRO/Ⅱ8.0 aiming to reduce its high energy consumption

and the key process parameters such as the change of the output of LNG

the mass ratio and the BOG temperature are analysed. An optimized process

named the precooling of BOG

is proposed

in which the sub-cooled high pressure LNG is used to cool the BOG from the compressor before it enters into the recondenser aiming at reducing the compression ratio of BOG compressor. The optimized process can save the work of BOG compressor in 32.5% compared with the existing process and can improve the operation flexibility when the downstream system of gas transportation appears fluctuation in gas load between peak and valley. Therefore

the proposed process has better performance for peak-valley adjustment.

关键词

Keywords

references

Views

528

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Absorption solubility calculation and process simulation for CO2 capture

Soft computing applied to gas-assisted injection molding process optimization

Thermo-gas-elastic coupling performance analysis of high-speed and high-temperature foil face seals

Study on flash evaporation characteristics as well as thermodynamic variation performance in liquid hydrogen tank during on-orbit venting

Recent advances in machine learning for modeling and control of crystallization processes

Related Author

ZHENG Que

DONG Lihu

CHEN Jian

GAO Guanghua

FEI Weiyang

张响

童水光

李倩

Related Institution

清华大学化学工程联合国家重点实验室

浙江大学化工机械研究所，郑州大学国家橡塑模具工程研究中心，陕西理工学院材料科学与工程学院

⁰