Numerical simulation of gas-solids fast separator in ultra-short contact reactor
|更新时间:2025-12-10
|
Numerical simulation of gas-solids fast separator in ultra-short contact reactor
CIESC JournalIssue 3, Pages: 623-628(2010)
作者机构:
清华大学化学工程系,北京市绿色反应工程与工艺重点实验室
作者简介:
基金信息:
DOI:
CLC:
Online First:05 March 2010,
Published:05 March 2010
稿件说明:
移动端阅览
ZHANG Li, YAN Binhang, WU Changning, et al. Numerical simulation of gas-solids fast separator in ultra-short contact reactor[J]. CIESC Journal, 2010, (3): 623-628.
DOI:
ZHANG Li, YAN Binhang, WU Changning, et al. Numerical simulation of gas-solids fast separator in ultra-short contact reactor[J]. CIESC Journal, 2010, (3): 623-628.DOI:
Numerical simulation of gas-solids fast separator in ultra-short contact reactor
A gas-solids fast separator was studied for its potential application in the process of coal pyrolysis to acetylene in plasma. The CFD method was employed to simulate the flow behavior in the gas-solids fast separator based on the realizable k-ε turbulence model and the discrete particle model(DPM).The separation efficiency and residence time of gas phase in the gas-solids fast separator could be calculated. The numerical simulations were validated by the experimental results at a low velocity of the inlet gas(e. g. ,4 m·s-1).With the increase of gas velocity at the inlet,the separation efficiency was increased,and the residence time of gas phase was reduced accordingly. The separation efficiency approached 100% when particle diameter was larger than 20 μm. When inlet velocity was 100 m·s-1,the mean residence time of gas phase was about 35 ms. To be noted,the performance of the gas-solids fast separator could be improved,for example by shortening the length of the separator,with a reduced residence time of gas phase at ~20 ms. It is expected that the gas-solids fast separator can meet the stringent demand of the coal pyrolysis to acetylene process for the milliseconds reaction,quench and separation.