An experimental study on pyrolysis gas characteristics of typical components of medical waste
|更新时间:2025-12-10
|
An experimental study on pyrolysis gas characteristics of typical components of medical waste
CIESC JournalIssue 1, Pages: 230-237(2009)
作者机构:
能源清洁利用国家重点实验室(浙江大学)
作者简介:
基金信息:
DOI:
CLC:
Online First:05 January 2009,
Published:05 January 2009
稿件说明:
移动端阅览
JIANG Xuguang, LI Chunyu, LAI Yan’e, et al. An experimental study on pyrolysis gas characteristics of typical components of medical waste[J]. CIESC Journal, 2009, (1): 230-237.
DOI:
JIANG Xuguang, LI Chunyu, LAI Yan’e, et al. An experimental study on pyrolysis gas characteristics of typical components of medical waste[J]. CIESC Journal, 2009, (1): 230-237.DOI:
An experimental study on pyrolysis gas characteristics of typical components of medical waste
Pyrolysis characteristics of typical organic components of medical waste were studied by using a fixed bed tubular reactor.The composition and volume fraction of pyrolysis gas were measured by on-line gas analyzers.The effect of pyrolysis temperature was also analyzed.The results indicated that the material characteristics and the final pyrolysis temperature had great effects on the release and volume fraction of pyrolysis gas.The results indicated that the absorbent cotton and bamboo had a lower initial temperature than polypropylene when pyrolyzed.The maximum of gas generation rate and the gas yield increased with the pyrolysis temperature
as well as the proportion of the combustible gas in the total gas products.