Dynamic modeling and simulation for a semi-batch catalytic distillation column
|更新时间:2025-12-10
|
Dynamic modeling and simulation for a semi-batch catalytic distillation column
CIESC JournalIssue 1, Pages: 187-192(2009)
作者机构:
1. 中国海洋大学化学化工学院
2. 辽宁奥克化学集团
作者简介:
基金信息:
DOI:
CLC:
Online First:05 January 2009,
Published:05 January 2009
稿件说明:
移动端阅览
AN Weizhong, YU Fengjuan, HU Yangdong, et al. Dynamic modeling and simulation for a semi-batch catalytic distillation column[J]. CIESC Journal, 2009, (1): 187-192.
DOI:
AN Weizhong, YU Fengjuan, HU Yangdong, et al. Dynamic modeling and simulation for a semi-batch catalytic distillation column[J]. CIESC Journal, 2009, (1): 187-192.DOI:
Dynamic modeling and simulation for a semi-batch catalytic distillation column
A new application of catalytic distillation (CD) for the production of ethylene glycol monobutyl ether (EGMBE) from ethylene oxide (EO) and n-butanol was developed.A pilot-scale CD column was built up
which was operated in a semi-batch mode for safety consideration.A dynamic model was developed for the description of the semi-batch CD process.Simulations were performed to investigate the effect of feed flow rate of EO on conversion of reactants and selectivity toward EGMBE
so as to obtain the optimal and safe operating conditions.The simulation provided the typically dynamic profiles of the liquid and vapor flow rates
compositions and temperature
which were compared with the experimental data.The results obtained indicated the model developed was reasonable
and also the potential advantage of using CD for the production of EGMBE.
Simulation of process for butanone-toluene solvent recovering in dewaxing of complex oil and/or wax mixtures replaced by a pseudo-single heavy component
Process simulation of methyl acetate hydrolysis via catalytic distillation
Numerical simulation on performances of rough-cut cyclone in FCC disengager
From multi-scale to meso-scale:new challenges for simulation of complex processes in chemical engineering
Multi-scale simulation of turbulent mixing in ejector