Solubilization of excess sludge by high speed rotary disk

HAN Jin; ZHU Tong; IMAI Tsuyoshi; XIE Liyang; XU Chenghai; NOZAKI Tsutomu

您当前的位置：

首页 >

文章列表页 >

Solubilization of excess sludge by high speed rotary disk

更新时间：2025-12-10

- Solubilization of excess sludge by high speed rotary disk
- CIESC Journal Issue 2, Pages: 478-483(2008)
- 作者机构：
  
  东北大学机械工程与自动化学院，日本山口大学大学院理工学研究科
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：05 February 2008，
  
  Published：05 February 2008
- 稿件说明：
移动端阅览
HAN Jin, ZHU Tong, IMAI Tsuyoshi, et al. Solubilization of excess sludge by high speed rotary disk[J]. CIESC Journal, 2008, (2): 478-483.
DOI：

HAN Jin, ZHU Tong, IMAI Tsuyoshi, et al. Solubilization of excess sludge by high speed rotary disk[J]. CIESC Journal, 2008, (2): 478-483. DOI：

摘要

高速转盘法是作者等开发的一种新型的剩余污泥可溶化处理的物理方法，是一种经济实用的剩余污泥减量化、资源化的前处理工艺。实验采用自制的高速转盘对污泥进行可溶化处理，并对实验过程中污泥的可溶化机制、实验装置的结构及运转参数与污泥可溶化之间的关联特性进行了研究。结果表明：高速转盘所产生的流体剪切力是导致污泥可溶化的主要原因，同时，转盘与定盘之间的研磨作用和水解酶的酶促反应也对污泥可溶化起到了促进作用。研究发现：流体剪切力仅存在于距转盘微小距离的空间内对污泥微生物细胞进行破碎，而且足够大的转盘转速与足够高的污泥MLSS浓度才能产生高效的导致污泥可溶化的流体剪切力。在转盘转速为5000 r·min-1，污泥MLSS浓度高于18000 mg·L-1，处理45 min时，污泥的可溶化率(DOC/TOC)达50%以上。

Abstract

A novel

economical and applicable equipment

high speed rotary disk (HSRD) was brought forward by the authors based on experimental research.As a physical pretreatment process of excess sludge reduction and resource recovery technology

the solubilization effects of HSRD upon excess sludge were investigated.According to the experimental results

besides grinding and hydrolytic enzyme effects

the fluid shearing force generated by the rotary disk contributed to the solubilization of the sludge.And the shearing force can only be generated by high rotating speed of the rotary disk with high MLSS concentration of the sludge.Moreover

the high solubilization rate (DOC/TOC>50%) could be achieved under the optimum condition: rotating speed 5000 r·min-1， MLSS of the sludge higher than 18000 mg·L-1， and treatment time 45 min.

关键词

Keywords

references

Views

626

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Analysis of flow field characteristics and mixing performance of different SK-type static mixers

Identification of gas-liquid two-phase flow patterns in a riser based on recursive characteristics and CNN

Advantages and risks of swirling cooling granulation towers

Corrosion health status assessment method for refining unit pipeline based on GLAE-MLP

A hybrid modeling and optimization strategy for sequential simulated moving bed

Related Author

No data

Related Institution

No data

⁰