Coupling mechanism of internal reforming and electrochemical reaction in SOFC
|更新时间:2025-12-10
|
Coupling mechanism of internal reforming and electrochemical reaction in SOFC
CIESC JournalIssue 4, Pages: 1008-1015(2008)
作者机构:
1. 大连海事大学轮机工程学院,辽宁,大连,116026
2. 瑞典路德大学能源科学系,路德,瑞典,22100
作者简介:
基金信息:
DOI:
CLC:
Online First:05 April 2008,
Published:05 April 2008
稿件说明:
移动端阅览
YANG Guogang, LV Xinrong, YUE Danting, et al. Coupling mechanism of internal reforming and electrochemical reaction in SOFC[J]. CIESC Journal, 2008, (4): 1008-1015.
DOI:
YANG Guogang, LV Xinrong, YUE Danting, et al. Coupling mechanism of internal reforming and electrochemical reaction in SOFC[J]. CIESC Journal, 2008, (4): 1008-1015.DOI:
Coupling mechanism of internal reforming and electrochemical reaction in SOFC
The overall performance of solid oxide fuel cell (SOFC) is controlled by CH4 steam reforming reactions and CO
H2 electrochemical reactions
which take place in the porous anode simultaneously and are influenced by various operation and design parameters when pre-reformed methane/steam mixture is used.The composite duct consisted of a porous anode layer
fuel gas flow duct and solid plate.A fully three dimensional numerical simulation program was developed to analyze the coupling mechanism of reforming and electrochemical reaction.Steam reforming was found mostly at the interface and entrance regions within the porous layer close to the fuel flow duct.Electrochemical reaction occurred on the surface between electrolyte and porous layer.CO
H2 produced by reforming reaction reached the bottom of porous layer and took part in electrochemical reaction. The heat required to keep internal steam reforming reaction was provided by the electrochemical reaction.The SOFC anode composite duct in this paper operated under proper conditions had good heat and mass transfer properties and good coupling relations between reforming and electrochemical reactions.