Heat transfer enhancement in round tube with cross over disk: experiment and simulation

LIU Chunjiang; LIU Hui; LU Hanbing; YUAN Xigang

您当前的位置：

首页 >

文章列表页 >

Heat transfer enhancement in round tube with cross over disk: experiment and simulation

更新时间：2025-12-10

- Heat transfer enhancement in round tube with cross over disk: experiment and simulation
- CIESC Journal Issue 2, Pages: 301-308(2008)
- 作者机构：
  
  天津大学化学工程研究所，化学工程联合国家重点实验室(天津大学)
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：05 February 2008，
  
  Published：05 February 2008
- 稿件说明：
移动端阅览
LIU Chunjiang, LIU Hui, LU Hanbing, et al. Heat transfer enhancement in round tube with cross over disk: experiment and simulation[J]. CIESC Journal, 2008, (2): 301-308.
DOI：

LIU Chunjiang, LIU Hui, LU Hanbing, et al. Heat transfer enhancement in round tube with cross over disk: experiment and simulation[J]. CIESC Journal, 2008, (2): 301-308. DOI：

摘要

对装有新型强化传热管内插入物-立交盘的管路压降与传热情况进行了实验研究

并利用计算流体力学方法模拟了结构参数变化对传热及压降的影响。实验方面，通过不同黏度的测量物系，测定了Reynolds数为2×10-4～4×104时装有立交盘管路的压降，得到了摩擦系数与Reynolds数的关系曲线，并拟合了关联式，结果表明相同条件下装有立交盘的管路其压降为空管的7～40倍。其次，利用蒸气加热麦芽糖浆的传热实验，测量了水平放置与垂直放置条件下空管与装有立交盘时管路传热情况，拟合了相应的传热关联式，结果表明爬流条件下水平放置时传热强化倍数为2～3.5倍，垂直放置时传热强化倍数为2.5～4倍。最后，采用计算流体力学的方法，利用Fluent软件对立交盘的传热及流动过程进行了模拟研究，考察了结构参数变化对传热及压降的影响，整合了内外流道直径比及长径比对传热及压降的影响关联式，为立交盘的优化设计提供了理论依据。

Abstract

Experimental and numerical methods were used to study heat transfer enhancement in a round tube with a new type of insert: cross over disk (COD).Pressure drop experiments were carried out in the round tube with maltose.The correlation of friction factor for Reynolds number was given under Re range from 2×10-4 to 4×104.The pressure drop in the round tube with COD was 7—40 times bigger than the empty tube.Heat transfer experiments were performed both in vertical and horizontal tubes with COD.The maltose was heated by steam in the tube.The heat transfer correlations were obtained.In the creeping flow

the heat transfer enhancement for the horizontal tube was about 2—3.5 times bigger than the empty tube

and about 2.5—4 times for the vertical tube.The influence for geometrical parameters

such as r/R and l/d on heat transfer and pressure drop was examined by computational fluid dynamics software Fluent and correlations to describe the effect of these parameters were obtained.These correlations could be used in optimal design of the heat transfer system using COD as insert.

关键词

Keywords

references

Views

296

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

基于浓度扩散的风力机尾流模型

Coupled simulation of combustion with heat transfer and cracking reaction in SL-Ⅱ industrial ethylene pyrolyzer

Membrane thickness gradient of isoflux ceramic membrane based on CFD

Large eddy simulation for mixing time in stirred tank with dual Rushton turbines

Euler-Lagrange/DEM simulation of flow behavior of clusters in riser

Related Author

王峻

张兴

宋梦譞

陈凯

HU Guihua

QIAN Feng

WANG Honggang

LIU Shitao

Related Institution

清华大学自动化系

清华大学工程力学系，传热与能源利用北京市重点实验室，热科学与动力工程教育部重点实验室

华东理工大学化学工程联合国家重点实验室

南京工业大学化学化工学院, 材料化学工程国家重点实验室

中国大唐集团科技工程有限公司

⁰