Experimental validation of a hybrid ejector model with refrigerant R141B
|更新时间:2025-12-10
|
Experimental validation of a hybrid ejector model with refrigerant R141B
CIESC JournalIssue 9, Pages: 2188-2193(2008)
作者机构:
1. 西安交通大学能源与动力工程学院
2. School of Electrical and Electronic Engineering, Nanyang Technological University,Singapore
作者简介:
基金信息:
DOI:
CLC:
Online First:05 September 2008,
Published:05 September 2008
稿件说明:
移动端阅览
ZHU Yinhai, LI Yanzhong, YU Jianlin, et al. Experimental validation of a hybrid ejector model with refrigerant R141B[J]. CIESC Journal, 2008, (9): 2188-2193.
DOI:
ZHU Yinhai, LI Yanzhong, YU Jianlin, et al. Experimental validation of a hybrid ejector model with refrigerant R141B[J]. CIESC Journal, 2008, (9): 2188-2193.DOI:
Experimental validation of a hybrid ejector model with refrigerant R141B
A simple but effective hybrid ejector model was developed.First a fundamental model for calculating entrainment ratio was derived based on thermodynamic and fluid dynamic principles.Then a 2D velocity function was used to approximate the velocity distribution of entrained flow to simplify the fundamental equation.Based on numerical studies and the lumped-parameter method
the hybrid ejector model was finally established.Compared with the existing models
the developed model was very simple
consisting of only one equation and three constant parameters.Therefore the model can be used in real time control and optimization of ejector systems.Furthermore
the procedure for identifying the parameters was presented.In the end
an ejector refrigeration system with refrigerant R141B was investigated.The results of the experimental validation showed that the proposed model could accurately predict the ejector performance.