Refrigeration performance of strontium chloride composite adsorbents for chemisorption refrigeration
|更新时间:2025-12-10
|
Refrigeration performance of strontium chloride composite adsorbents for chemisorption refrigeration
CIESC JournalIssue 4, Pages: 836-842(2008)
作者机构:
华南理工大学化工与能源学院,广东省绿色化学产品技术重点实验室,广东,广州,510640
作者简介:
基金信息:
DOI:
CLC:
Online First:05 April 2008,
Published:05 April 2008
稿件说明:
移动端阅览
CHEN Li, WANG Li, WANG Honglin, et al. Refrigeration performance of strontium chloride composite adsorbents for chemisorption refrigeration[J]. CIESC Journal, 2008, (4): 836-842.
DOI:
CHEN Li, WANG Li, WANG Honglin, et al. Refrigeration performance of strontium chloride composite adsorbents for chemisorption refrigeration[J]. CIESC Journal, 2008, (4): 836-842.DOI:
Refrigeration performance of strontium chloride composite adsorbents for chemisorption refrigeration
A study on the adsorption characteristics of the adsorption refrigeration working pairs using strontium chloride and activated carbon as adsorbents and ammonia as refrigerant was performed.The strontium chloride adsorbent particles had a lower strength which would cause them to swell and smash after a period of working time. In addition
the heat and mass transfer characteristics of the adsorption bed would deteriorate.To solve these problems
activated carbon and calcium sulfate were added and mixed to the strontium chloride with a mass ratio 20%
separately.The adsorption mechanism of strontium chloride and gelation of calcium sulfate were also discussed.The adsorption refrigeration experimental results showed that the control factor was temperature.For example
the refrigeration capacity of the unit adsorbent of strontium chloride/activated carbon and strontium chloride/calcium sulfate were 2.1 times and 1.4 times higher than that of strontium chloride at 100℃
respectively.BET(Brunauer-Emmett-Teller)specific surface area and pore structure of adsorbents were examined.The results showed that the BET specific surface area and pore structure of SrCl2/CaSO4 were kept at the same level
and the BET specific surface area of SrCl2/activated carbon increased greatly and its pore structure was improved.