Analysis of steady state model for loop pulsating heat pipe

SU Lei; ZHANG Hong

您当前的位置：

首页 >

文章列表页 >

Analysis of steady state model for loop pulsating heat pipe

更新时间：2025-12-10

- Analysis of steady state model for loop pulsating heat pipe
- CIESC Journal Issue 11, Pages: 2718-2725(2008)
- 作者机构：
  
  南京工业大学能源学院
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：05 November 2008，
  
  Published：05 November 2008
- 稿件说明：
移动端阅览
SU Lei, ZHANG Hong. Analysis of steady state model for loop pulsating heat pipe[J]. CIESC Journal, 2008, (11): 2718-2725.
DOI：

SU Lei, ZHANG Hong. Analysis of steady state model for loop pulsating heat pipe[J]. CIESC Journal, 2008, (11): 2718-2725. DOI：

摘要

建立了简单回路脉动热管稳定运行的传热模型

分析影响稳定传热热阻和传热功率的主要因素。结果显示，回路脉动热管的传热热阻可分为冷却热阻和循环热阻，其中冷却流速、冷却面积和冷却段长度占总长度的比例，是影响冷却热阻的主要因素；热源温度和充液率是影响循环热阻的主要因素；冷却温度对传热热阻影响很小。对空气冷却式回路脉动热管，提高冷却面积、冷却段长度比例和冷却流速，提高热源温度、降低冷却温度，提高充液率都可提高传热功率，其中前3个因素是提高传热功率的最佳途径。稳定运行时，传热功率的充液率范围为10%～80%，且随充液率增加，传热功率略有增加。

Abstract

A heat transfer model of the simple loop pulsating heat pipe（PHP）was established to analyze the key influence factors for the thermal resistance and heat transfer rate of PHP.The results indicated that the thermal resistance of PHP included cooling thermal resistance and cycling thermal resistance.The velocity of cooling flow

cooling area

and the ratio of cooling area to heating area were the major factors affecting the cooling resistance

while the temperature of heat source and the charging ratio were the main factors affecting the cycling thermal resistance.The cooling temperature had less influence on thermal resistance.Heat transfer rate could be enhanced by the increase of cooling area

the ratio of cooling area to heating area

velocity of cooling flow

temperature of heat source

charging ratio

and reduction of cooling temperature.Enhancing the first three factors was the best way to increase heat transfer rate.The charging ratio varied from 10% to 80%

when the loop pulsating heat pipe was in the steady working condition

and the heat transfer rate increased a little as the charging ratio increased.

关键词

Keywords

references

Views

250

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Numerical investigation of electronic thermal control unit with foam composite phase change material

Steady state circulation flow analysis of loop pulsating heat pipe

Performance of alkali metal-loaded SrMnO3 oxygen carriers in chemical looping oxidative dehydrogenation of ethylbenzene

Identification of gas-liquid two-phase flow patterns in a riser based on recursive characteristics and CNN

Multi objective optimization of flow and heat transfer characteristics of modified manifold microchannel heat sink based on machine learning

Related Author

WU Bin

XING Yuming

XU Weiqiang

SU Lei

ZHANG Hong

Related Institution

北京航空航天大学航空科学与工程学院

南京工业大学

⁰