Utilization of calcium lignosulfonate with different molecular masses in mortar for shield tunneling method
|更新时间:2025-12-10
|
Utilization of calcium lignosulfonate with different molecular masses in mortar for shield tunneling method
CIESC JournalIssue 9, Pages: 2382-2387(2007)
作者机构:
华南理工大学化工与能源学院,广东省绿色化学产品技术重点实验室
作者简介:
基金信息:
DOI:
CLC:
Online First:05 September 2007,
Published:05 September 2007
稿件说明:
移动端阅览
ZHENG Dafeng, QIU Xueqing, LOU Hongming, et al. Utilization of calcium lignosulfonate with different molecular masses in mortar for shield tunneling method[J]. CIESC Journal, 2007, (9): 2382-2387.
DOI:
ZHENG Dafeng, QIU Xueqing, LOU Hongming, et al. Utilization of calcium lignosulfonate with different molecular masses in mortar for shield tunneling method[J]. CIESC Journal, 2007, (9): 2382-2387.DOI:
Utilization of calcium lignosulfonate with different molecular masses in mortar for shield tunneling method
Calcium lignosulfonate(CLS) was separated by ultrafilter and was characterized with IR spectroscopy.The effects of CLS with different relative molecular masses(M) on the properties (fluidity
fluidity loss
stability
setting time) of the mortar for the shield tunneling method was investigated.The results showed that the effects of CLS3 (the fraction with medium-to-high M) were the most evident.When 0.4% (mass) CLS3 was added
water reduction of the mortar was 9.4%
fluidity was enhanced from 193 mm to 243 mm
relative fluidity loss after 3 h was reduced from 71.6% to 43.0%
and the bleeding after 2 h decreased from 5.1% to 1.0%.Medium-to-high molecular mass of CLS was proposed to modify CLS as the admixture of the mortar for the shield tunneling method.