Effects of additive on product quality of seed precipitation in sodium aluminate solution
|更新时间:2025-12-10
|
Effects of additive on product quality of seed precipitation in sodium aluminate solution
CIESC JournalIssue 8, Pages: 2120-2124(2007)
作者机构:
1. 东北大学材料与冶金学院
2. 中国铝业股份有限公司河南分公司
3. 沈阳工业大学材料学院
4. 沈阳铝镁设计研
作者简介:
基金信息:
DOI:
CLC:
Online First:05 August 2007,
Published:05 August 2007
稿件说明:
移动端阅览
WANG Xihui, YU Haiyan, WU Yusheng, et al. Effects of additive on product quality of seed precipitation in sodium aluminate solution[J]. CIESC Journal, 2007, (8): 2120-2124.
DOI:
WANG Xihui, YU Haiyan, WU Yusheng, et al. Effects of additive on product quality of seed precipitation in sodium aluminate solution[J]. CIESC Journal, 2007, (8): 2120-2124.DOI:
Effects of additive on product quality of seed precipitation in sodium aluminate solution
The effect of an additive prepared from fatty acid surface active agent and heneicosane on two-stage seed precipitation process and Al2O3 production was studied.The results showed that the additive,with concentration of 60×10-6g·L-1,enhanced remarkably the precipitation process and improved the quality of Al(OH)3 and Al2O3.The precipitation rate of sodium aluminate solution increased by 2%,and the percentage of <45μm particles of Al(OH)3 and Al2O3 reduced by about 7% and 6.7%
respectively by adding the additive.The SEM photographs indicated that the additive could accelerate growth,agglomeration of Al(OH)3 particles and the Al(OH)3 particles were in the shape of globular crystals.The mechanism of additive effect was also studied.