Effects of humidification temperature and gas velocity on liquid water distribution and removal in cathode channel of PEMFC

MA Haipeng; ZHANG Huamin; HU Jun; CAI Yinghua

您当前的位置：

首页 >

文章列表页 >

Effects of humidification temperature and gas velocity on liquid water distribution and removal in cathode channel of PEMFC

更新时间：2025-12-10

- Effects of humidification temperature and gas velocity on liquid water distribution and removal in cathode channel of PEMFC
- CIESC Journal Issue 9, Pages: 2357-2362(2007)
- 作者机构：
  
  1. 中国科学院大连化学物理研究所燃料电池关键材料与技术实验室
  2. 中国科学院研究生院
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：05 September 2007，
  
  Published：05 September 2007
- 稿件说明：
移动端阅览
MA Haipeng, ZHANG Huamin, HU Jun, et al. Effects of humidification temperature and gas velocity on liquid water distribution and removal in cathode channel of PEMFC[J]. CIESC Journal, 2007, (9): 2357-2362.
DOI：

MA Haipeng, ZHANG Huamin, HU Jun, et al. Effects of humidification temperature and gas velocity on liquid water distribution and removal in cathode channel of PEMFC[J]. CIESC Journal, 2007, (9): 2357-2362. DOI：

摘要

通过直条单流道可视化PEM单池研究了阴极流道内液态水的传递行为，给出了液态排水与流道进、出口压降间的直接关系。结合可视化与压降测量，开发一种评价流道内液态水积累及排出的新方法，考察了增湿温度与气体流速对流道内液态水分布及排水的影响。随着增湿温度提高，存水区域由流道下部向进口扩展。对于给定流道，存在一特定流速。在该流速下液滴临界直径与流道尺寸相当，流道内液态水积累最严重。在本实验条件下，该特定流速为2 m·s-1。为了及时排出液态水，气体流速不能低于3 m·s-1。

Abstract

A transparent PEM single cell with a single straight channel was used to investigate the liquid water transport in the cathode channel.The direct relationship between liquid water removal and pressure-drop between inlet and outlet of the channel was obtained.A diagnostic method was developed to evaluate liquid water accumulation and removal in the channel by combining visualization and pressure-drop measurement.With the increase in humidification temperature

the region of liquid water extended from the lower part of the channel towards the inlet.For a given flow channel

there was a specific velocity

at which the droplet critical diameter was comparable with the channel size and liquid water accumulation in the channel was the highest.Under the study conditions

the specific velocity was 2 m·s-1.To discharge the liquid water in time

gas velocity should not be lower than 3 m·s-1.

关键词

Keywords

references

Views

225

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

微通道内低沸点工质流动沸腾压降特性

Flow characteristics of gas-liquid two-phase flow in small vertical rectangular channel

Pressure drop model of multicyclone separator at high-pressure

Air-side heat transfer and friction characteristics of wavy fin-and-tube heat exchangers under dehumidifying conditions

Flow assurance of hydrate slurry in pipeline

Related Author

谢荣建

白健美

马虎根

鲍伟

WANG Hongbo

ZHOU Yunlong

WU Xiaolin

XIONG Zhiyi

Related Institution

上海理工大学能源与动力工程学院

东北电力大学能源与动力工程学院

浙江大学能源工程学系

中油管道机械制造有限责任公司

中国石油大学机电工程学院

⁰