V-Cu oxide for transesterification of dimethyl carbonate with phenol
|更新时间:2025-12-10
|
V-Cu oxide for transesterification of dimethyl carbonate with phenol
CIESC JournalIssue 7, Pages: 1746-1750(2007)
作者机构:
中国科学院成都有机化学研究所
作者简介:
基金信息:
DOI:
CLC:
Online First:05 July 2007,
Published:05 July 2007
稿件说明:
移动端阅览
TONG Dongshen, CHEN Tong, HU Xuteng, et al. V-Cu oxide for transesterification of dimethyl carbonate with phenol[J]. CIESC Journal, 2007, (7): 1746-1750.
DOI:
TONG Dongshen, CHEN Tong, HU Xuteng, et al. V-Cu oxide for transesterification of dimethyl carbonate with phenol[J]. CIESC Journal, 2007, (7): 1746-1750.DOI:
V-Cu oxide for transesterification of dimethyl carbonate with phenol
A series of catalysts were studied for the synthesis of diphenyl carbonate (DPC) by transesterification of dimethyl carbonate (DMC) with phenol.It was found that V-Cu oxide was the best catalyst among the tested catalysts.The effects of V-Cu amount
molar ratio of copper to vanadium
molar ratio of dimethyl carbonate to phenol and reaction time were investigated.Under the conditions of catalyst amount 3.1% (mass ratio to phenol)
molar ratio of Cu/V of 1∶4
molar ratio of DMC/phenol of 1.5∶1 and a reaction time 9 h
the maximum conversion of phenol and total yields of methyl phenyl carbonate (MPC) and DPC were 41.9% and 40.3%
respectively.Reuse of the catalyst revealed that V-Cu oxide was a relatively stable catalyst.The activity of the catalyst after being reused four times reduced from 41.9% to 29.1%.Moreover
the deactivated catalyst was easily regenerated by calcination in air
and the catalytic activity of the regenerated catalyst was almost as high as that of the fresh sample