Preparation and characterization of CNT-supported cobalt catalysts for 1-octene hydroformylation
|更新时间:2025-12-10
|
Preparation and characterization of CNT-supported cobalt catalysts for 1-octene hydroformylation
CIESC JournalIssue 4, Pages: 780-784(2006)
作者机构:
大连理工大学精细化工国家重点实验室,碳素材料研究室,纳米材料科学研究中心,辽宁,大连,116012
作者简介:
基金信息:
DOI:
CLC:
Online First:25 April 2006,
Published:25 April 2006
稿件说明:
移动端阅览
ZHANG Hongzhe, WANG Xiuna, LI Jiawei, et al. Preparation and characterization of CNT-supported cobalt catalysts for 1-octene hydroformylation[J]. CIESC Journal, 2006, (4): 780-784.
DOI:
ZHANG Hongzhe, WANG Xiuna, LI Jiawei, et al. Preparation and characterization of CNT-supported cobalt catalysts for 1-octene hydroformylation[J]. CIESC Journal, 2006, (4): 780-784.DOI:
Preparation and characterization of CNT-supported cobalt catalysts for 1-octene hydroformylation
Carbon nanotube-supported cobalt catalysts were prepared by using three techniques including impregnation method (IP)
metal organic chemical vapor deposition method (MOCVD) and modified ethylene glycol method (EG). The size distribution of Co metal particles on Co/CNTs was studied with XRD and TEM. It was found that the Co/CNT catalysts prepared by MOCVD had high and homogeneous dispersion of spherical Co metal particles with a narrow particle-size distribution in the range of 5—10 nm centering around 7.5 nm
which is consistent with the calculated value 7.1 nm obtained by Scherrer formula from the XRD data. For the hydroformylation of 1-octene
the Co/CNT catalysts prepared by MOCVD were superior to those prepared by other methods and showed significantly higher activity and regioselectivity.The excellent catalytic performance could be attributed to homogeneous distribution and small size of cobalt metal particles.