Natural gas & coal co-gasification to produce synthesis gas in hot simulation
|更新时间:2025-12-10
|
Natural gas & coal co-gasification to produce synthesis gas in hot simulation
CIESC JournalIssue 10, Pages: 1936-1941(2005)
作者机构:
中国科学院过程工程研究所,北京,100080
作者简介:
基金信息:
DOI:
CLC:
Online First:25 October 2005,
Published:25 October 2005
稿件说明:
移动端阅览
OUYANG Zhaobin, DUAN Dongping, GUO Zhancheng, et al. Natural gas & coal co-gasification to produce synthesis gas in hot simulation[J]. CIESC Journal, 2005, (10): 1936-1941.
DOI:
OUYANG Zhaobin, DUAN Dongping, GUO Zhancheng, et al. Natural gas & coal co-gasification to produce synthesis gas in hot simulation[J]. CIESC Journal, 2005, (10): 1936-1941.DOI:
Natural gas & coal co-gasification to produce synthesis gas in hot simulation
natural gas & coal co-gasification for synthesis gas production
was developed by combining natural gas steam reforming and coal gasification process.The H2/CO ratio of crude synthesis gas could be controlled in the range of 1.0—2.0. Using a moving bed as reactor
coke and coal as the raw materials in the preliminary study of hot simulative experiments
the effects of blowing parameters H2O/CH4/O2 on the temperature in the flame zone and the H2/CO ratio of synthesis gas were investigated.Natural gas and oxygen were blown into the reactor at the same position to keep the temperature of reactor above 1000 ℃ and the blowing parameters H2O/CH4/O2 were adjusted to produce crude synthesis gas
in which the H2/CO ratio varied to the range of 1.0—2.0
the contents of active compounds (H2 and CO) were more than 90.0% and the residue methane was less than 2.0%.The concept of natural gas & coal co-gasification process is correct and feasible.