INFILTRATION OF MOLTEN ALUMINUM WITH TRANSIENT SOLIDIFICATION AND REMELTING IN CENTRIFUGAL CASTING PROCESSES

HU Guoxin; YANG Lihui; TIAN Qinwei

您当前的位置：

首页 >

文章列表页 >

INFILTRATION OF MOLTEN ALUMINUM WITH TRANSIENT SOLIDIFICATION AND REMELTING IN CENTRIFUGAL CASTING PROCESSES

更新时间：2025-12-10

- INFILTRATION OF MOLTEN ALUMINUM WITH TRANSIENT SOLIDIFICATION AND REMELTING IN CENTRIFUGAL CASTING PROCESSES
- CIESC Journal Issue 5, Pages: 794-799(2004)
- 作者机构：
  
  上海交通大学机械与动力工程学院,上海,200030
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：25 May 2004，
  
  Published：25 May 2004
- 稿件说明：
移动端阅览
HU Guoxin, YANG Lihui, TIAN Qinwei. INFILTRATION OF MOLTEN ALUMINUM WITH TRANSIENT SOLIDIFICATION AND REMELTING IN CENTRIFUGAL CASTING PROCESSES[J]. CIESC Journal, 2004, (5): 794-799.
DOI：

HU Guoxin, YANG Lihui, TIAN Qinwei. INFILTRATION OF MOLTEN ALUMINUM WITH TRANSIENT SOLIDIFICATION AND REMELTING IN CENTRIFUGAL CASTING PROCESSES[J]. CIESC Journal, 2004, (5): 794-799. DOI：

摘要

针对离心渗铸工艺中熔体浇注温度太高会带来铸件冶金质量下降问题，在充型过程中一般会发生金属熔液的瞬态固化与再熔现象，建立了旋转多孔介质内伴随有瞬态固化与再熔现象的渗流传热理论模型.通过理论分析获得了离心渗铸充型过程中瞬态压力分布计算公式，建立了不同区域界面的移动速率与温度间的耦合关系，分析了流场变化规律.结果表明：渗透前沿界面推移速度主要受离心渗透压力即渗透动力学因素的影响，而再熔界面推移速度主要受热导率和金属相变特性即材料热力学因素的影响，多孔预型体内发生的瞬态固化与再熔是决定充形过程中渗铸复合层能达到的最大厚度的重要因素.

Abstract

In this work

a fully coupled fluid flow and heat transfer model was developed to analyze molten aluminum infiltration with transient solidification and remelting through a fibrous preform in a centrifugal force field. The pressure

temperature and velocity distribution in the preform and the solid volume fraction profiles were presented for different conditions. The results show that the fibrous volume fraction and the rotational speed of equipment were very influential on transient solidification and remelting in the centrifugal force field. The length of solidification zone and its solidification rate increased with the advance of infiltration interface.An increase of rotational speed and porosity resulted in an increase of composite temperature

and a decrease of the solid volume fraction

as well as the length of solidification zone during the centrifugal casting process.

关键词

Keywords

references

Views

164

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Coupled processes of chemical reaction, heat and mass transfer in non-thermal equilibrium porous medium

Lattice Boltzmann method for heat transfer of melting in porous media with high Darcy number

Parallel computing of gas flow through ceramic filter by using lattice Boltzmann method

Heat transfer of laminar flow over a plate embedded in porous medium with a constant heat flux under local non-equilibrium condition

Analysis of super-adiabatic combustion in porous  media by excess enthalpy function

Related Author

LI Mingchun

TIAN Yanwen

ZHAI Yuchun

CHEN Zhenqian

GAO Dongyan

JI Zhongli

SUN Meiyu

LI Juxiang

Related Institution

东北大学冶金物理化学所

东南大学城市工程科学国际研究中心

东南大学能源与环境学院

中国石油大学机电工程学院

华东理工大学机械与动力工程学院

⁰