EFFECT OF PLASTIC DEFORMATION ON TEXTURE AND CORROSION RESISTANCE OF AISI304 STAINLESS STEEL

XU Chunchun; ZHANG Xinsheng; HU Gang

您当前的位置：

首页 >

文章列表页 >

EFFECT OF PLASTIC DEFORMATION ON TEXTURE AND CORROSION RESISTANCE OF AISI304 STAINLESS STEEL

更新时间：2025-12-10

- EFFECT OF PLASTIC DEFORMATION ON TEXTURE AND CORROSION RESISTANCE OF AISI304 STAINLESS STEEL
- CIESC Journal Issue 6, Pages: 790-795(2003)
- 作者机构：
  
  北京化工大学材料科学与工程学院
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：25 June 2003，
  
  Published：25 June 2003
- 稿件说明：
移动端阅览
XU Chunchun, ZHANG Xinsheng, HU Gang. EFFECT OF PLASTIC DEFORMATION ON TEXTURE AND CORROSION RESISTANCE OF AISI304 STAINLESS STEEL[J]. CIESC Journal, 2003, (6): 790-795.
DOI：

XU Chunchun, ZHANG Xinsheng, HU Gang. EFFECT OF PLASTIC DEFORMATION ON TEXTURE AND CORROSION RESISTANCE OF AISI304 STAINLESS STEEL[J]. CIESC Journal, 2003, (6): 790-795. DOI：

摘要

AISI304不锈钢分别在加热180 ℃和低温-70 ℃条件下进行拉伸变形。采用透射电镜观测位错分布，利用铁素体测量仪测定马氏体相(铁磁相)含量，并通过电化学滞后技术分别研究它们在50 ℃条件下0.5 mol·L-1 MgCl2水溶液中的腐蚀行为.结果表明：加热180 ℃和低温-70 ℃条件下塑性变形均使AISI304不锈钢中位错密度随变形量增大而增加，AISI304不锈钢在-70 ℃条件下塑性变形时部分奥氏体相转变为马氏体相，而在180 ℃条件下塑性变形时不发生马氏体相变；位错密度的增加使AISI304不锈钢钝化膜的击穿电位略微正移，而马氏体相的增加使击穿电位呈负移趋势，材料耐孔蚀性能降低.

Abstract

Plastic deformation of AISI304 stainless steel was carried out at -70 ℃ and 180 ℃. The distribution of dislocations was observed with transmission electron microscope (TEM)

martensite phase content was determined by use of ferrmagnetometer

and the corrosion behavior of AISI304 stainless steel was studied by potentiodynamic polarization in 0.5 mol·L-1 MgCl2 solution at 50 ℃. The results showed that plastic deformation at both -70 ℃ and 180 ℃ made the dislocation density of AISI304 stainless steel increase with the increase of deformation. Martensite phase transformation was induced for deformation at -70 ℃

whereas it was not at 180 ℃. As the dislocation density increased

the breakdown potential of AISI304 stainless steel’s passive film became a little more positive. As martensite phase content increased

it became more negative and pitting corrosion resistance decreased.

关键词

Keywords

references

Views

187

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Thermodynamic study of germanium-impurity competitive deposition in GeCl4-MxCly-H2 system

Controlled synthesis of Bi2MoO6/MoO3 composite fibers via in-situ hydrothermal method and their high-efficiency photocatalytic hydrogen production performance

Research progress of ionic liquids in separation of aromatics/alkanes and olefins/alkanes

Progress of solar photo-thermo-catalysis for ammonia synthesis and decomposition under mild conditions

Multi objective optimization of flow and heat transfer characteristics of modified manifold microchannel heat sink based on machine learning

Related Author

No data

Related Institution

No data

⁰