MINERAL CHARACTERISTICS IN ASH WHEN CO-FIRING COAL AND CALCIUM-BASED COMPOUND ADDITIVES
|更新时间:2025-12-10
|
MINERAL CHARACTERISTICS IN ASH WHEN CO-FIRING COAL AND CALCIUM-BASED COMPOUND ADDITIVES
CIESC JournalIssue 10, Pages: 1424-1429(2003)
作者机构:
华中科技大学煤燃烧国家重点实验室,湖北,武汉,430074
作者简介:
基金信息:
DOI:
CLC:
Online First:25 October 2003,
Published:25 October 2003
稿件说明:
移动端阅览
LIU Hao, QIU Jianrong, ZHANG Xiaoping, et al. MINERAL CHARACTERISTICS IN ASH WHEN CO-FIRING COAL AND CALCIUM-BASED COMPOUND ADDITIVES[J]. CIESC Journal, 2003, (10): 1424-1429.
DOI:
LIU Hao, QIU Jianrong, ZHANG Xiaoping, et al. MINERAL CHARACTERISTICS IN ASH WHEN CO-FIRING COAL AND CALCIUM-BASED COMPOUND ADDITIVES[J]. CIESC Journal, 2003, (10): 1424-1429.DOI:
MINERAL CHARACTERISTICS IN ASH WHEN CO-FIRING COAL AND CALCIUM-BASED COMPOUND ADDITIVES
Mineral characteristics of ash when combusting pulverized coal and calcium-based compound additives was studied with a lab-scale furnace used for combustion test. The mineralogical composition of the collected ash was determined by X-ray diffraction (XRD). The effects of temperature
residence time and content of additives on the mineral characteristics of ash were analyzed. The results revealed that the minerals in ash were principally free oxides and a small amount of gehlenite and dicalcium silicate at 1000℃; as the firing temperature increased above 1200℃
the major minerals in the ash were gehlenite and dicalcium silicate. Moreover
It was found that anhydrous calcium aluminosulfate formed at a high temperature,which plays the role of desulfurization.