NUMERICAL SIMULATION OF HEADER CONSTRUCTION OF PLATE-FIN HEAT EXCHANGER

ZHANG Zhe; LI Yanzhong; JIAO Anjun

您当前的位置：

首页 >

文章列表页 >

NUMERICAL SIMULATION OF HEADER CONSTRUCTION OF PLATE-FIN HEAT EXCHANGER

更新时间：2025-12-10

- NUMERICAL SIMULATION OF HEADER CONSTRUCTION OF PLATE-FIN HEAT EXCHANGER
- CIESC Journal Issue 11, (2002)
- 作者机构：
  
  西安交通大学能动学院
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：25 November 2002，
  
  Published：25 November 2002
- 稿件说明：
移动端阅览
ZHANG Zhe, LI Yanzhong, JIAO Anjun. NUMERICAL SIMULATION OF HEADER CONSTRUCTION OF PLATE-FIN HEAT EXCHANGER[J]. CIESC Journal, 2002, (11).
DOI：

ZHANG Zhe, LI Yanzhong, JIAO Anjun. NUMERICAL SIMULATION OF HEADER CONSTRUCTION OF PLATE-FIN HEAT EXCHANGER[J]. CIESC Journal, 2002, (11). DOI：

摘要

建立了板翅式换热器封头结构的湍流数学模型

并采用此模型对目前工业中应用的基本型封头内部的速度场分布进行了数值计算

计算结果表明 :封头内部物流分配存在严重的不均匀性

同时发现改变封头的结构可以有效地改善换热器内部的物流分配 .在此基础上对两种改进型封头结构进行了数值模拟

计算结果表明改进效果明显

在进口Reynolds数为 83000时绝对不均匀度已从3.47减小到 0 .71.计算结果与实验结果吻合良好 .

Abstract

A computational fluid dynamics (CFD) program FLUENT has been used to predict the fluid flow distribution in plate-fin heat exchanger.It is found that the fluid flow maldistribution is very serious in the direction of header length for the conventional header used in industry.Based on the analysis of the fluid flow maldistribution

two improved headers with a two-stage distributing configuration are recommended and predicted by CFD.The predictions indicate that the improved header configuration can effectively improve the performance of fluid flow distribution in the heat exchanger.The absolute degree of fluid flow nonuniformity in plate-fin heat exchanger has reduced from 3.47 to 0.71 by changing the header ocnfiguration.The computational results are in good agreement with experimental ones

which indicates that the CFD technology is capable of closely predicting the fluid flow distribution in plate-fin heat exchanger.

关键词

Keywords

references

Views

982

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study on microstructure of NaCl solution ice centrifugal separation based on Micro-CT and deep learning

Methods of adaptive prediction and abnormal states traceability for sulphur content in flue gas desulfurization process

Experimental study of heat transfer enhancement by pressure waves in cross flow tube bundles

Performance study of gas-liquid vortex separators under low cross-sectional gas velocity

Oxygen mass transfer performance of hollow fiber non-bubble aeration membrane based on gas/liquid-phase measurement method

Related Author

No data

Related Institution

No data

⁰