MIXED FOULING GROWTH PROCESS-MICROBIAL AND CaCO3 FOULING IN WATER SYSTEMS
|更新时间:2025-12-10
|
MIXED FOULING GROWTH PROCESS-MICROBIAL AND CaCO3 FOULING IN WATER SYSTEMS
CIESC JournalIssue 12, (2002)
作者机构:
大连理工大学化工学院化学工程系
作者简介:
基金信息:
DOI:
CLC:
Online First:25 December 2002,
Published:25 December 2002
稿件说明:
移动端阅览
LI Xiangqin, LIU Tianqing, WANG Hongling, et al. MIXED FOULING GROWTH PROCESS-MICROBIAL AND CaCO3 FOULING IN WATER SYSTEMS[J]. CIESC Journal, 2002, (12).
DOI:
LI Xiangqin, LIU Tianqing, WANG Hongling, et al. MIXED FOULING GROWTH PROCESS-MICROBIAL AND CaCO3 FOULING IN WATER SYSTEMS[J]. CIESC Journal, 2002, (12).DOI:
MIXED FOULING GROWTH PROCESS-MICROBIAL AND CaCO3 FOULING IN WATER SYSTEMS
The initial formation process of mixed fouling of Pseudomonas fluorescent and CaCO3 on the different solid surfaces in a simulated cooling water system was investigated. The mixed fouling behavior on different solid surfaces under the conditions of different CaCO3 saturation levels and bulk velocities was examined
and the growth curves of mixed fouling were obtained. The results showed that the average mass of mixed fouling was less than that of biofouling. In the unsaturated CaCO3 solution
the average mixed fouling mass was little; but in the saturated CaCO3 solution
with the saturation level of CaCO3 and bulk velocity increasing
the average mass and induction period of the mixed fouling decreased. The mixed fouling mass on non- metallic material surfaces was more than that on metal material surfaces. It was also found that CaCO3 particles were adsorbed to the surfaces firstly
then microbes were adsorbed. The existence of CaCO3 inhibited the combination of microbes with surfaces
on the other hand
the adsorption and growth of microbes suppressed CaCO3 fouling development.