R&D OF LARGE AXIAL-RADIAL REACTOR FOR ETHYLBENZENE DEHYDROGENATION(Ⅱ) REACTOR SIMULATION AND ANALYSIS
|更新时间:2025-12-10
|
R&D OF LARGE AXIAL-RADIAL REACTOR FOR ETHYLBENZENE DEHYDROGENATION(Ⅱ) REACTOR SIMULATION AND ANALYSIS
CIESC JournalIssue 10, (2001)
作者机构:
华东理工大学化工工艺研究所
作者简介:
基金信息:
DOI:
CLC:
Online First:25 October 2001,
Published:25 October 2001
稿件说明:
移动端阅览
XU Zhigang, ZHU Zibin, ZHANG Chengfang, et al. R&D OF LARGE AXIAL-RADIAL REACTOR FOR ETHYLBENZENE DEHYDROGENATION(Ⅱ) REACTOR SIMULATION AND ANALYSIS[J]. CIESC Journal, 2001, (10).
DOI:
XU Zhigang, ZHU Zibin, ZHANG Chengfang, et al. R&D OF LARGE AXIAL-RADIAL REACTOR FOR ETHYLBENZENE DEHYDROGENATION(Ⅱ) REACTOR SIMULATION AND ANALYSIS[J]. CIESC Journal, 2001, (10).DOI:
R&D OF LARGE AXIAL-RADIAL REACTOR FOR ETHYLBENZENE DEHYDROGENATION(Ⅱ) REACTOR SIMULATION AND ANALYSIS
A two-dimensional quasi-homogenous mathematical model has been developed on the basis of the two-dimensional flow model to simulate the axial-radial flow reactor for dehydrogenation of ethylbenzene to styrene under reduced pressure in this paper.The mathematical model is solved by using the finite difference method.The results show that the conversion of the axial-radial flow reactor is higher by 0.1%~0.6% than the radial flow reactor whereas the selectivity is approximately same and there is a low temperature and high styrene concentration area in the catalyst sealing zone.The model is verified by the data of a commercial axial-radial flow reactor for ethylbenzene dehydrogenation and can be used to guide its design.