CIESC Journal ›› 2015, Vol. 66 ›› Issue (1): 366-372.DOI: 10.11949/j.issn.0438-1157.20141562

Previous Articles     Next Articles

Simulation and optimization of operating parameters of isothermal reaction process for acetylene hydrogenation

HU Baolong, HU Guihua, JIANG Da, QIAN Feng   

  1. Key Laboratory of Advanced Control and Optimization for Chemical Processed of Ministry of Education, East China University of Science and Technology, Shanghai 200237, China
  • Received:2014-10-15 Revised:2014-10-24 Online:2015-01-05 Published:2015-01-05
  • Supported by:

    supported by the National Basic Research Program of China (2012CB720500), the National Natural Science Foundation of China (U1162202, 21276078), the Fundamental Research Funds for the Central Universities (222201314031), and Shanghai “Scientific and Technological Innovation Action Plan” Research Platform Construction Project (13DZ2295300).

碳二加氢等温反应过程模拟与操作参数优化

胡宝龙, 胡贵华, 蒋达, 钱锋   

  1. 华东理工大学化工过程先进控制与优化技术教育部重点实验室, 上海 200237
  • 通讯作者: 钱锋, 胡贵华
  • 基金资助:

    国家重点基础研究发展计划项目(2012CB720500);国家自然科学基金项目(U1162202, 21276078);中央高校基本科研业务专项基金项目(222201314031);上海市“科技创新行动计划”研发平台建设项目(13DZ2295300)。

Abstract:

With the study object of an acetylene hydrogenation reactor with isothermal tubular fixed bed, this paper used computational fluid dynamics (CFD) method to establish the two-dimensional homogeneous flow reactor model that had heat exchange with the outside. By adding the solid-gas energy equations, the heat exchange model of porous medium zone and two-temperature model of gas-solid coupled heat transfer are established. The genetic algorithm was used to fit reacting kinetic parameters. And the ratio of hydrogen acetylene ration (H2/C2H2) and the cooling temperature were optimized to meet the maximum of reaction selectivity. Simulation results show that the optimal hydrogen acetylene ratio is 1.18 and the optimal cooling temperature is 334.66 K. Finally, based on the simulation and optimization results, the effects of the hydrogen acetylene ratio and the cooling temperature on the selectivity of acetylene hydrogenation reaction were analysed, and therefore they provide an important significance for improving the operating performance of acetylene hydrogenation reactor.

Key words: acetylene hydrogenation, computational fluid dynamics, genetic algorithm, optimization

摘要:

以碳二加氢等温管式固定床反应器为研究对象, 利用计算流体力学(CFD)方法建立了与外界有热量交换的二维均相流反应器模型, 通过添加气固能量方程, 建立了多孔介质区内部热交换与气固耦合传热的两温度模型。采用遗传算法对反应的动力学参数进行了拟合, 并以加氢选择性最优为目标函数, 对碳二加氢反应的入口氢炔比与反应器的冷却温度进行优化, 得到最优氢炔比为1.18, 最优的冷却温度为334.66 K。最后根据模拟与优化结果, 分析了氢炔比和冷却温度对加氢反应选择性的影响, 对提高加氢反应器的操作性能具有重要的意义。

关键词: 碳二加氢, 计算流体力学, 遗传算法, 优化

CLC Number: