CIESC Journal ›› 2012, Vol. 63 ›› Issue (5): 1517-1521.DOI: 10.3969/j.issn.0438-1157.2012.05.028

Previous Articles     Next Articles

Relationship between adsorption effect of anticorrosion additive and anticorrosion ability of lubricating oil

FENG Bing1,2,LIU Shuanghong1,CHEN Guoxu2,WANG Kun1   

  1. 1 92117 Unit of PLA;2 PLA Logistical Engineering University
  • Received:2011-07-23 Revised:2012-02-19 Online:2012-05-05 Published:2012-05-05

防腐剂吸附效应与润滑油防腐性能的关系

冯兵1,2,刘双红1,陈国需2,王昆1   

  1. 1中国人民解放军92117部队;2中国人民解放军后勤工程学院
  • 通讯作者: 冯兵

Abstract: A series of lubricating oils containing different mass fractions of anticorrosion additive were prepared.Static adsorbent experiments using simulating axletree balls in those lubricating oil samples were performed.The absorbency of lubricating oil before and after the adsorbent experiments were measured with UV spectrograph,and the adsorbent quantity of anticorrosion additive was calculated through the absorbency difference of the lubricating oil before and after the adsorbent experiments to characterize the adsorption effect of anticorrosion additive.The temperature and humidity of ocean environment were simulated through a self-made equipment,and the axletree balls with which adsorbent experiments were performed in the lubricating oil were put into the equipment to do the corrosion experiments.Data processing on the laboratory findings was made according to the hierarchical corrosion grade criterion,and the anticorrosion ability of the lubricating oil was estimated on the basis of axletree balls’ corrosion grade.The relationship between adsorbent quantity of anticorrosion additive on the axletree balls surface and anticorrosion ability of lubricating oil indicated that the anticorrosion ability of lubricating oil was determined by the adsorption effect of anticorrosion additive.

Key words: anticorrosion additive, UV spectrum, adsorption effect, anticorrosion ability, lubricating oil

关键词: 防腐剂, 紫外吸光度, 吸附效应, 防腐性能, 润滑油

CLC Number: