CIESC Journal ›› 2019, Vol. 70 ›› Issue (4): 1628-1634.DOI: 10.11949/j.issn.0438-1157.20181395

• Festschrift in Honor of Professor Gordon McKay on occasion of his retirement • Previous Articles     Next Articles

Preparation of LiFePO4/C plate cathode materials and their electrochemical properties

Qiang GAO(),Hong LYU,Fan XIONG,Fei CHEN,Zeheng YANG(),Weixin ZHANG   

  1. School of Chemistry and Chemical Engineering, Hefei University of Technology, Hefei 230009, Anhui, China
  • Received:2018-11-22 Revised:2019-01-07 Online:2019-04-05 Published:2019-04-05
  • Contact: Zeheng YANG

片状LiFePO4/C正极材料制备及其电化学性能研究

高强(),吕洪,熊凡,陈飞,杨则恒(),张卫新   

  1. 合肥工业大学化学与化工学院,安徽 合肥 230009
  • 通讯作者: 杨则恒
  • 作者简介:<named-content content-type="corresp-name">高强</named-content>(1995—),男,硕士研究生,<email>15056097539@163.com</email>|杨则恒(1961—),男,博士,教授,<email>yangzh0219@sina.com</email>
  • 基金资助:
    国家自然科学基金项目(91834301,91534102);安徽省科技攻关项目(1501021013)

Abstract:

Under mild reaction conditions, flaky iron phosphate dihydrate was successfully synthesized using sodium dodecyl benzene sulfonate (SDBS), and mixed with lithium hydroxide and citric acid by ball milling, and prepared by carbothermal reduction method. The effects of SDBS on FePO4·2H2O morphology and the electrochemical properties of LiFePO4/C were studied. The phase, morphology and electrochemical properties of the synthesized samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and charge-discharge test. The LiFePO4/C plate-like electrode material achieves excellent electrochemical performance under 2.0—4.2 V at 25℃. It delivers a specific discharge capacity of 166.4 mA·h·g–1 at 0.1 C with initial Coulombic efficiency up to 99.6% and exhibits a capacity retention of 99% after 500 cycles at 1 C.

Key words: synthesis, two-dimensional plate, surfactants, ferric phosphate, lithium iron phosphate, electrochemistry

摘要:

在温和的反应条件下,使用十二烷基苯磺酸钠(SDBS)成功合成了片状二水磷酸铁,并将其与氢氧化锂、柠檬酸球磨混合,采用碳热还原法制备了具有纳米厚度的片状LiFePO4/C电极材料。研究了SDBS对磷酸铁形貌以及LiFePO4/C电极材料电化学性能的影响。利用X-射线衍射、扫描电子显微镜和充放电测试等技术手段,对合成样品的物相、形貌和电化学性能进行了分析测试。电化学测试表明,在25℃,2.0~4.2 V电压范围条件下,使用片状二水磷酸铁为前驱体制备的LiFePO4/C样品,在0.1 C下放电比容量高达166.4 mA·h·g-1,且首次库仑效率达到99.6%,在1 C下循环500次容量保持率为99%,表现出了优异的电化学性能。

关键词: 合成, 二维片状, 表面活性剂, 二水磷酸铁, 磷酸铁锂, 电化学

CLC Number: