CIESC Journal ›› 2018, Vol. 69 ›› Issue (3): 1008-1013.DOI: 10.11949/j.issn.0438-1157.20171442

Previous Articles     Next Articles

Simulation and optimization of shale gas purification process by sensitivity analysis

LI Weida, LIU Linlin, ZHANG Lei, WANG Shaojing, DU Jian   

  1. Institute of Process Systems Engineering, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China
  • Received:2017-10-30 Revised:2017-11-07 Online:2018-03-05 Published:2018-03-05
  • Supported by:

    supported by the National Natural Science Foundation of China (21576036, 21776035).

基于灵敏度分析的页岩气净化流程的模拟与优化

李伟达, 刘琳琳, 张磊, 王少靖, 都健   

  1. 大连理工大学化工系统工程研究所, 辽宁 大连 116024
  • 通讯作者: 都健
  • 基金资助:

    国家自然科学基金项目(21576036,21776035)。

Abstract:

Removal of acid gases and moisture in raw shale gas is one basic requirement of shale gas downstream processing and utilization. Shale gas sweetening and dehydration process were simulated by software Aspen Plus v8.6 in order to provide theoretical and technical guidance for shale gas purification industry. In sweetening process, sensitivity analysis was used to analyze and optimize process parameters such as feed stage of absorbent regeneration and reflux ratio of regenerator. In dehydration process, correlation method between water content and water dew point of shale gas was proposed which provided a foundation to determine dehydration specification. Moreover, stripping gas was employed to regenerate highly concentrated absorbent and to meet high dehydration requirements for the process.

Key words: shale gas purification, absorption, simulation, optimal design, sensitivity analysis, stripping gas method

摘要:

原料气中酸性气体与水等杂质的脱除净化是页岩气下游加工与利用的基础。应用化工流程模拟软件对页岩气脱酸与脱水流程进行模拟,旨为气体净化工业的实践提供理论与技术指导。在脱酸流程模拟中,采用灵敏度分析的方法讨论并优化了吸收剂再生进料位置、再生塔回流比等参数对脱酸流程的影响。脱水流程模拟中,提出了页岩气水含量与水露点的关联方法,为脱水标准的选取提供依据;采用汽提法解决了高浓度吸收剂的再生问题,使流程能够满足更高的脱水要求。

关键词: 页岩气净化, 吸收, 模拟, 优化设计, 灵敏度分析, 汽提法

CLC Number: