翅片重力热管传热性能实验研究

doi:10.11949/0438-1157.20190933

化工学报 ›› 2020, Vol. 71 ›› Issue (2): 594-601.DOI: 10.11949/0438-1157.20190933

翅片重力热管传热性能实验研究

马奕新¹(),金宇²,张虎¹(),王娴¹,唐桂华³

^1.西安交通大学机械结构强度与振动国家重点实验室, 陕西西安 710049
^2.北京空间飞行器总体设计部, 北京 100094
^3.西安交通大学热流科学与工程教育部重点实验室, 陕西西安 710049

收稿日期:2019-08-14 修回日期:2019-11-19 出版日期:2020-02-05 发布日期:2020-02-05
通讯作者: 张虎
作者简介:马奕新（1993—），男，硕士研究生，myx311@stu.xjtu.edu.cn
基金资助:
国家自然科学基金项目(51606143);博新计划项目(20180244);国家博士后基金项目(2018M643641);中央高校基本科研业务费专项资金项目(xjj2018029)

Experimental study on heat transfer performance of finned gravity heat pipe

Yixin MA¹(),Yu JIN²,Hu ZHANG¹(),Xian WANG¹,Guihua TANG³

^1.State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi an Jiaotong University, Xi an 710049, Shaanxi, China
^2.Beijing Institute of Spacecraft System Engineering, Beijing 100094, China
^3.Key Laboratory of Thermo-Fluid Science and Engineering, Ministry of Education, Xi an Jiaotong University, Xi an 710049, Shaanxi, China

Received:2019-08-14 Revised:2019-11-19 Online:2020-02-05 Published:2020-02-05
Contact: Hu ZHANG

摘要/Abstract

摘要：

热管是一种利用工质相变传热，具有传热温差小、热响应速度快、换热量大等优点的传热元件。为研究翅片重力热管的传热性能，实验测试了翅片重力热管与平板重力热管（铝-丙酮工质）的传热性能，比较了其瞬态热响应速率，获得了翅片与平板重力热管在蒸发段不同电功率稳定加热条件下表面温度沿高度方向的变化规律，计算了平板热管的等效热导率，并与铝板测量结果进行了对比。结果表明：重力热管传热速度快、表面均温效果好，热导率随功率的增大先升高后降低，整体上热导率高达纯铝的84~258倍，翅片热管相比于平板热管具有更好的均温性和散热效果，在建筑供暖、车载电池散热、余热利用等领域具有广泛的应用前景。

关键词: 翅片重力热管, 相变, 传热, 均温性, 热导率

Abstract:

The heat pipe is a kind of heat transfer element that utilizes phase change heat transfer of working medium, with the advantages of small heat transfer temperature difference, fast thermal response speed, large heat exchange capacity and so on. In order to study the heat transfer performance of finned gravity heat pipe, the heat transfer characteristics of finned heat pipe and flat heat pipe (combination of aluminum-acetone) are investigated experimentally. The dynamic temperature responses of finned heat pipe and flat heat pipe are obtained and compared. The steady state temperature distributions along the length direction of finned heat pipe and flat heat pipe are measured under different heating power. Then the effective thermal conductivity of flat heat pipe is calculated with the temperature difference across the uniform temperature section. Comparison is made to the test results of aluminum. The results show that the gravity heat pipe has faster thermal response and better temperature uniformity along the pipe. With the increment of heating power, the effective thermal conductivity of gravity heat pipe increases at first and then decreases which is almost 84—258 times of aluminum. Compared with flat gravity heat pipe, the finned heat pipe has higher temperature uniformity and heat dissipation ability. Thus the finned gravity heat pipe has wide application prospect in architecture heating, vehicle battery heat dissipation and waste heat utilization.

Key words: finned gravity heat pipe, phase change, heat transfer, temperature uniformity, thermal conductivity

中图分类号:

TK 172.4

马奕新, 金宇, 张虎, 王娴, 唐桂华. 翅片重力热管传热性能实验研究[J]. 化工学报, 2020, 71(2): 594-601.

Yixin MA, Yu JIN, Hu ZHANG, Xian WANG, Guihua TANG. Experimental study on heat transfer performance of finned gravity heat pipe[J]. CIESC Journal, 2020, 71(2): 594-601.

图/表 10

表1 实验件几何参数

Table 1 Geometric parameters of samples

试件名称	长×宽×厚/m	内腔的长×宽×高/m	充液率/%
铝板	0.95×0.06×0.004	—	—
平板热管	0.95×0.06×0.00314	0.90×0.058×0.00114	30
翅片热管	0.60×0.075×0.00314	0.55×0.073×0.00114	30

图1 测试实验件

Fig.1 Test samples

图2 实验测试系统

Fig.2 Experimental test system

图3 不同实验件35 W功率下的瞬态温度响应规律

Fig.3 Transient temperature response of different samples heating with 35 W

图4 平板热管在92℃水浴下加热的瞬态温度响应规律

Fig.4 Transient temperature response of flat heat pipe heating in 92℃ thermostatic waterbath

图5 不同实验件沿程温度分布

Fig.5 Temperature distribution of different samples along length direction

图6 加热功率10 W时不同实验件的温度分布对比

Fig.6 Comparison of temperature distribution of different samples heating with 10 W

图7 平板热管稳态沿程温度分布

Fig.7 Temperature distribution of flat heat pipe

图8 平板热管的等效热导率

Fig.8 Effective thermal conductivity of flat heat pipe

图9 铝板的等效热导率

Fig.9 Effective thermal conductivity of aluminum

参考文献 31

1	Volodymyr B, Stanislav Z, Jaroslav V, et al. Elaboration of thermal control systems on heat pipes for microsatellites magion 4, 5 and BIRD[J]. Applied Thermal Engineering, 2003, 23(9): 1109-1117.
2	Theodore D S, Gajanana C B. NASA thermal control technologies for robotic spacecraft[J]. Applied Thermal Engineering, 2003, 23(9): 1055-1065.
3	Roger R R, Thiago D. Development of an experimental loop heat pipe for application in future space missions[J]. Applied Thermal Engineering, 2005, 25(1): 101-112.
4	Kim T Y, Hyun B S, Lee J J, et al. Numerical study of the spacecraft thermal control hardware combining solid-liquid phase change material and a heat pipe[J]. Aerospace Science & Technology, 2013, 27(1): 10-16.
5	Wang X F, Sun Z J, Wu C Z, et al. Experimental study on thermosyphon heat sink for cooling of electronic apparatus[J]. Journal of Electron Devices, 2004, 27(3): 393-396.
6	Chen B B, Liu W, Liu Z C, et al. Experimental investigation of loop heat pipe with flat evaporator using biporous wick[J]. Applied Thermal Engineering, 2012, 42(42): 34-40.
7	Chang Y W, Cheng C H, Wang J C, et al. Heat pipe for cooling of electronic equipment[J]. Energy Conversion and Management, 2008, 49(11): 3398-3404.
8	Zhang H, Zhuang J. Research, development and industrial application of heat pipe technology in China[J]. Applied Thermal Engineering, 2003, 23(9): 1067-1083.
9	Abd El-Baky M A, Mohamed M M. Heat pipe heat exchanger for heat recovery in air conditioning[J]. Applied Thermal Engineering, 2007, 27(4): 795-801.
10	王锐, 董重成, 吴辉敏. 热管用于建筑供暖的初步研究[J]. 低温建筑技术, 2014, 36(2):35-37.
	Wang R, Dong C C, Wu H M. Preliminary research on heat pipe used in building heating[J]. Low Temperature Architecture Technology, 2007, 27(4): 795-801.
11	Grover G M, Cotter T P, Erickson G F. Structures of very high thermal conductance[J]. Journal of Applied Physics, 1964, 35(6): 1990-1991.
12	Cotter T P. Theory of heat pipes[J]. Theory of Heat Pipes, 1965, 25(5): 1366-1373.
13	孙志坚, 何国安, 王立新, 等. 两种电子器件用重力型热管散热器的换热特性[J]. 化工学报, 2006, 57(10): 2283-2288.
	Sun Z J, He G A, Wang L X, et al. Heat transfer characteristics of two different thermosiphon radiators for electronic device[J]. Journal of Chemical Industry and Engineering （China）, 2006, 57(10): 2283-2288.
14	王伟, 夏国栋, 马丹丹, 等. 重力径向偏心热管的温度特性[J]. 化工学报, 2016, 67(9): 3651-3657.
	Wang W, Xia G D, Ma D D, et al. Temperature characteristics of radial eccentric gravity heat pipe[J]. CIESC Journal, 2016, 67(9): 3651-3657.
15	何曙, 夏再忠, 王如竹. 一种新型重力热管传热性能研究[J]. 工程热物理学报, 2009, 30(5):834-836.
	He S, Xia Z Z, Wang R Z. Heat transfer characteristics of an innovative gravity heat pipe[J]. Journal of Engineering Thermophysics, 2009, 30(5): 834-836.
16	Shiraishi M, Kikuchi K, Yamanishi T. Investigation of heat transfer characteristics of a two-phase closed thermosyphon[J]. Journal of Heat Recovery Systems, 1981, 1(4): 287-297.
17	Jiao B, Qiu L M, Zhang X B, et al. Investigation on the effect of filling ratio on the steady-state heat transfer performance of a vertical two-phase closed thermosyphon[J]. Applied Thermal Engineering, 2008, 28(11): 1417-1426.
18	Noie S H. Heat transfer characteristics of a two-phase closed thermosyphon[J]. Applied Thermal Engineering, 2005, 25(4): 495-506.
19	Noie S H, Emami M R S, Khoshnoodi M. Effect of inclination angle and filling ratio on thermal performance of a two-phase closed thermosyphon under normal operating conditions[J]. Heat Transfer Engineering, 2007, 28(4): 365-371.
20	闫小克, 唐志伟, 俞昌铭. 热管传热性能的评价方法及其测试装置[J]. 计量学报, 2003, 24(2):113-115.
	Yan X K, Tang Z W, Yu C M. A method for evaluating the heat transfer performance of heat pipe and its measuring apparatus[J]. Acta Metrological Sinica, 2003, 24(2): 113-115.
21	Tsai T E, Wu G W, Chang C C, et al. Dynamic test method for determining the thermal performances of heat pipes[J]. International Journal of Heat & Mass Transfer, 2010, 53(21): 4567-4578.
22	战洪仁, 李春晓, 王立鹏,等. 基于VOF模型对重力热管内部沸腾冷凝过程的仿真模拟[J]. 冶金能源, 2016, 35(1):30-34.
	Zhan H R, Li C X, Wang L P, et al. Simulation of the thermosiphon s ebullition and condensation based on VOF model[J]. Energy for Metallurgical Industry, 2016, 35(1): 30-34.
23	战洪仁, 吴众, 惠尧, 等. 基于VOF模型的倾角对重力热管性能影响数值研究[J]. 热力发电, 2017,46(6):40-45.
	Zhan H R, Wu Z, Hui Y, et al. Influence of dip angle on performance of gravitational heat pipe: numerical simulation based on VOF model[J]. Thermal Power Generation, 2017, 46(6): 40-45.
24	战洪仁, 张海松, 李春晓, 等. 重力热管流动与传热特性的数值研究[J]. 动力工程学报, 2017, 37(7):540-545.
	Zhan H R, Zhang H S, Li C X, et al. Simulation study on flow and heat-transfer characteristics of gravity heat pipes[J]. Journal of Chinese Society of Power Engineering, 2017, 37(7): 540-545.
25	王鑫煜, 辛公明, 田富中, 等. 小管径重力热管启动特性[J]. 化工学报, 2012, 63: 94-98．
	Wang X Y, Xin G M, Tian F Z, et a1. Start-up behavior of gravity heat pipe with small diameter[J]. CIESC Journal,2012, 63: 94-98．
26	辛公明, 秦秋杨, 张鲁生, 等. 小角度下自湿润流体重力热管传热特性[J]. 工程热物理学报, 2015,36(6):1282-1285.
	Xin G M, Qin Q Y, Zhang L S, et al. Thermal characteristics of gravity heat pipes with self-rewetting fluid at small inclination angles[J]. Journal of Engineering Thermophysics, 2015, 36(6): 1282-1285.
27	张劲草, 辛公明, 陈岩, 等. 蒸发段和冷凝段变化对重力热管性能的影响[J]. 化工学报, 2017, 68(4):1343-1348.
	Zhang J C, Xin G M, Chen Y, et al. Influence of changing evaporator/condenser section on operation characteristics of gravity heat pipe[J]. CIESC Journal, 2017, 68(4): 1343-1348.
28	韩振兴, 王冬骁, 王飞, 等. 重力热管冷凝段运行特征的可视化实验研究[J]. 化工学报, 2014, 65 (8):2934-2939.
	Han Z X, Wang D X, Wang F, et al. Visual experimental study on operation characteristics of condensation segment of gravity-assisted heat pipe[J]. CIESC Journal, 2014, 65(8): 2934-2939.
29	唐志伟, 连晨舟, 蒋章焰, 等. 重力热管弹状流工况的简化分析[J]. 工程热物理学报, 2002, 23(3):345-347.
	Tang Z W, Lian C Z, Jiang Z Y, et al. The analyses on the performance of the slug flow in gravity heat pipes[J]. Journal of Engineering Thermophysics, 2002, 23(3):345-347.
30	陈彦泽, 周一卉, 丁信伟. 重力热管传热波动特性研究及抑制方法探讨[J]. 热能动力工程, 2003, 18(4):334-337.
	Chen Y Z, Zhou Y H, Ding X W. An investigation of the heat-transfer fluctuation characteristics in gravity heat pipes and an exploration of methods for their restraint[J]. Journal of Engineering for Thermal Energy and Power, 2003, 18(4): 334-337.
31	杨世铭, 陶文铨. 传热学[M]. 4版. 北京: 高等教育出版社, 2006:555.
	Yang S M, Tao W Q. Heat Transfer[M]. 4th ed. Beijing: Higher Education Press, 2006:555.

[1]	张双星, 刘舫辰, 张义飞, 杜文静. R-134a脉动热管相变蓄放热实验研究[J]. 化工学报, 2023, 74(S1): 165-171.
[2]	张义飞, 刘舫辰, 张双星, 杜文静. 超临界二氧化碳用印刷电路板式换热器性能分析[J]. 化工学报, 2023, 74(S1): 183-190.
[3]	陈爱强, 代艳奇, 刘悦, 刘斌, 吴翰铭. 基板温度对HFE7100液滴蒸发过程的影响研究[J]. 化工学报, 2023, 74(S1): 191-197.
[4]	申利梅, 胡博兴, 谢雨霏, 曾伟豪, 张晓屿. 超薄平板热管传热性能的实验研究[J]. 化工学报, 2023, 74(S1): 198-205.
[5]	刘明栖, 吴延鹏. 导光管直径和长度对传热影响的模拟分析[J]. 化工学报, 2023, 74(S1): 206-212.
[6]	王志国, 薛孟, 董芋双, 张田震, 秦晓凯, 韩强. 基于裂隙粗糙性表征方法的地热岩体热流耦合数值模拟与分析[J]. 化工学报, 2023, 74(S1): 223-234.
[7]	江河, 袁俊飞, 王林, 邢谷雨. 均流腔结构对微细通道内相变流动特性影响的实验研究[J]. 化工学报, 2023, 74(S1): 235-244.
[8]	吴延鹏, 刘乾隆, 田东民, 陈凤君. 相变材料与热管耦合的电子器件热管理研究进展[J]. 化工学报, 2023, 74(S1): 25-31.
[9]	晁京伟, 许嘉兴, 李廷贤. 基于无管束蒸发换热强化策略的吸附热池的供热性能研究[J]. 化工学报, 2023, 74(S1): 302-310.
[10]	程成, 段钟弟, 孙浩然, 胡海涛, 薛鸿祥. 表面微结构对析晶沉积特性影响的格子Boltzmann模拟[J]. 化工学报, 2023, 74(S1): 74-86.
[11]	李艺彤, 郭航, 陈浩, 叶芳. 催化剂非均匀分布的质子交换膜燃料电池操作条件研究[J]. 化工学报, 2023, 74(9): 3831-3840.
[12]	王玉兵, 李杰, 詹宏波, 朱光亚, 张大林. R134a在菱形离散肋微小通道内的流动沸腾换热实验研究[J]. 化工学报, 2023, 74(9): 3797-3806.
[13]	李科, 文键, 忻碧平. 耦合蒸气冷却屏的真空多层绝热结构对液氢储罐自增压过程的影响机制研究[J]. 化工学报, 2023, 74(9): 3786-3796.
[14]	齐聪, 丁子, 余杰, 汤茂清, 梁林. 基于选择吸收纳米薄膜的太阳能温差发电特性研究[J]. 化工学报, 2023, 74(9): 3921-3930.
[15]	杨越, 张丹, 郑巨淦, 涂茂萍, 杨庆忠. NaCl水溶液喷射闪蒸-掺混蒸发的实验研究[J]. 化工学报, 2023, 74(8): 3279-3291.

翅片重力热管传热性能实验研究

Experimental study on heat transfer performance of finned gravity heat pipe

RichHTML

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

图/表 10

参考文献 31

相关文章 15

编辑推荐

Metrics

本文评价