接触式机械密封界面泄漏机理研究的关键科学问题

doi:10.11949/j.issn.0438-1157.20170302

摘要/Abstract

摘要：

密封界面的泄漏机理是机械密封研究与应用的焦点问题之一，涉及泄漏通道表征、粗糙表面的接触力学模型、界面微观形貌变化以及介质流体在泄漏通道中的流动阻力等问题。回顾了近几十年国内外接触式机械密封泄漏通道模型的研究，深入分析了G-W模型、M-B模型和Persson模型3种粗糙表面接触力学模型的贡献和存在的问题，提出了一种基于逾渗理论的泄漏通道新模型；探讨了密封界面的分形参数、泄漏通道的流动阻力以及密封界面的有限尺寸效应对泄漏特性的影响，指出孔隙连通贯穿界面和流体流经贯穿通道的流动阻力小是密封界面产生泄漏的成因，以及泄漏通道的形成和泄漏通道内的流体流动特性是泄漏机理研究的主要方向。

关键词: 机械密封, 界面, 空隙率, 微通道, 固体力学, 泄漏, 阻力, 模型

Abstract:

As one focal point for research and application of mechanical seals, leakage mechanism of seal interface involves characterizing leakage channels, modeling contact mechanics of rough surface, exploring morphological changes of seal interface and defining fluid flow resistance in leakage channels. The development of leakage channel models of contact mechanical seals in recent decades was reviewed. After analyzing contributions and problems of G-W, M-B, and Persson models of rough surface contact mechanics, a new percolation channel model was proposed. The effects of fractal parameters of seal interface, fluid flow resistance of channels, and limited size of seal interface on leakage characteristics were discussed. It was noteworthy to point out that leakage occurrence at seal interface was mainly due to pore connection across interface and low flow resistance of fluid through interface channels. Future studies on leakage mechanism will be formation of leakage channels and characteristics of fluid flow in these channels.

Key words: mechanical seals, interface, porosity, microchannels, solid mechanics, leakage, resistance, model

中图分类号:

TH136

嵇正波, 孙见君, 马晨波, 於秋萍, 陆建花. 接触式机械密封界面泄漏机理研究的关键科学问题[J]. 化工学报, 2017, 68(8): 2969-2978.

JI Zhengbo, SUN Jianjun, MA Chenbo, YU Qiuping, LU Jianhua. Key scientific problems for studying leakage mechanism of contact mechanical seal interface[J]. CIESC Journal, 2017, 68(8): 2969-2978.

参考文献 71

[1]	LEBECk A O. How much do we know about mechanical seals?[J]. Sealing Technology, 2006, 2006(9):11-12.
[2]	陆建花, 孙见君, 陈卫, 等. 自泵送机械密封与螺旋槽机械密封的性能比较[J]. 化工学报, 2016, 67(10):4370-4377. LU J H, SUN J J, CHENG W, et al. Performance comparison of self-pumping and spiral groove mechanical seals[J]. CIESC Journal, 2016, 67(10):4370-4377.
[3]	周敏, 孙见君, 马晨波, 等. 自泵送流体动压型机械密封性能分析[J]. 化工学报, 2015, 66(2):687-694. ZHOU M, SUN J J, MA C B, et al. Performance analysis of hydrodynamic mechanical seals based onself-pumping principle[J]. CIESC Journal, 2015, 66(2):687-694.
[4]	顾永泉. 机械密封实用技术[M]. 北京:机械工业出版社, 2001:8-9. GU Y Q. Mechanical Seal and Practical Technology[M]. Beijing:China Machine Press, 2001:8-9.
[5]	FAN Y E, GU F, BALL A. A review of the condition monitoring of mechanical seals[C]//ASME, 7th Biennial Conference on Engineering Systems Design and Analysis. Manchester, UK, 2004:179-184.
[6]	SUN J J, WEI L, FENG X, et al. Leakage prediction method for contacting mechanical seals with parallel faces[J]. Chinese Journal of Mechanical Engineering, 2010, 23(1):7-15.
[7]	HEINZE E. Über Gleitringdichtungen, mit. Besonderer BerÜcksichti-dung ihrer Verwendung im Kältema schinenbau[J]. Kältetechnik, 1949, 1(2):26-32.
[8]	MAYER E. Mechanical Seals[M]. London:Newnes Butterworth, 1997.
[9]	LEBECK A O. Hydrodynamic lubrication in wavy contacting face seals-a two dimensional model[J]. Journal of Lubrication Technology (ASME), 1981, 103(4):578-586.
[10]	LEBECK A O. Contacting mechanical seal design using a simple hydrostatic model[J]. Tribology International, 1988, 21(1):2-14.
[11]	ELHANAFI S, FARHANG K. Leakage prediction in mechanical seals under hydrostatic opening condition[C]//Proceedings of ASME/STLE International Joint Tribology Conference. San Diego, California, USA, 2007.
[12]	彭旭东, 顾永泉.不同相态下端面形貌和流体惯性对机械密封性能的影响[J]. 中国石油大学学报(自然科学版), 1990, (3):62-70. PENG X D, GU Y Q. The effects of coning face and fluid inertia on the performance of mechanical face seals at various phase states[J]. Journal of China University of Petroleum(Edition of Natural Science), 1990, (3):62-70.
[13]	MAJUMDAR A, BHUSHAN B. Fractal model of elastic-plastic contact between rough surfaces[J]. Journal of Tribology, 1991, 113(1):1-11.
[14]	GANTI S, BHUSHAN B. Generalized fractal analysis and its applications to engineering surfaces[J]. Wear, 1995, 180(1/2):17-34.
[15]	SUN J J, GU B Q. Investigation into effect of spring pressure on performance of balanced mechanical seals[J]. Chinese Journal of Mechanical Engineering, 2007, 20(3):39-43.
[16]	孙见君, 顾伯勤, 魏龙, 等. 接触式机械密封寿命预测方法[J]. 化工学报, 2008, 59(12):3095-3100. SUN J J, GU B Q, WEI L, et al. Predicting seal life for contact mechanical seals[J]. Journal of Chemical Industry and Engineering(China), 2008, 59(12):3095-3100.
[17]	魏龙, 顾伯勤, 张鹏高, 等. 机械密封磨合过程端面接触特性[J]. 化工学报, 2012, 63(10):3202-3207. WEI L, GU B Q, ZHANG P G, et al. Contact characterizations of end faces in mechanical seals runnin-in[J]. CIESC Journal, 2012, 63(10):3202-3207.
[18]	GREEN I. A transient dynamic analysis of mechanical seals including asperity contact and face deformation[J]. Tribology Transactions, 2002, 45(3):284-293.
[19]	BOTTIGLIONE F, CARBONE G, MANTRIOTA G. Fluid leakage in seals:an approach based on percolation theory[J]. Tribology International, 2009, 42(5):731-737.
[20]	ABOUEL-KASEM A. Numerical analysis of leakage rate for the selection of elastomeric sealing materials[J]. Sealing Technology, 2006, 2006(11):7-11.
[21]	BROADBEND S R, HAMMERSLEY J M. Percolation processes (Ⅰ):Crystals and mazes[C]//Mathematical Proceedings of the Cambridge Philosophical Society. Cambridge, England:Cambridge University Press, 1957, 53:629-641.
[22]	吕兆兴, 冯增朝, 赵阳升. 孔隙介质三维逾渗机制数值模拟研究[J]. 岩石力学与工程学报, 2007, 26(S2):4019-4023. LÜ Z X, FENG Z C, ZHAO Y S. Numerical simulation of 3D percolation mechanism in porous media[J]. Chinese Journal of Rock Mechanics and Engineering, 2007, 26(S2):4019-4023.
[23]	王启立. 石墨多孔介质成孔逾渗机理及渗透率研究[D]. 徐州:中国矿业大学, 2011. WANG Q L. Study on formation and percolation mechanism of pores and permeability in graphite porous media[D]. Xuzhou:China University of Mining and Technology, 2011.
[24]	黄锐, 张玲, 王旭, 等. 聚合物/弹性体/无机粒子三元复合体系的逾渗规律[J]. 塑料, 2003, 32(4):1-5. HUANG R, ZHANG L, WANG X, et al. Percolation rules of ternary polymer/elastomer/inorganic filler composites[J]. Plastic, 2003, 32(4):1-5.
[25]	周敏. 接触式机械密封界面的逾渗机制及通道模拟[D]. 南京:南京林业大学, 2015. ZHOU M. The percolation analysis and channel simulation on interfaces for contacting mechanical seal[D]. Nanjing:Nanjing Forestry University, 2015.
[26]	PUTIGNANO C, AFFERRANTE L, CARBONE G, et al. A new efficient numerical method for contact mechanics of rough surfaces[J]. International Journal of Solids & Structures, 2012, 49(2):338-343.
[27]	BHUSHAN B. The real area of contact in polymeric magnetic media (Ⅱ):Experimental data and analysis[J]. Tribology Transactions, 1985, 28(2):181-197.
[28]	DU Y, CHEN L, MCGRUER N E, et al. A finite element model of loading and unloading of an asperity contact with adhesion and plasticity[J]. Journal of Colloid & Interface Science, 2007, 312(2):522-528.
[29]	JIANG S Y, ZHENG Y J, ZHU H. A contact stiffness model of machined plane joint based on fractal theory[J]. Journal of Tribology, 2010, 132(1):011401.
[30]	ZHAI C P, HANAOR D, PROUST G, et al. Interfacial electro-mechanical behaviour at rough surfaces[J]. Extreme Mechanics Letters, 2016, 9:422-429.
[31]	HERTZ H. Über die Berührung fester elastischer Körperü[J]. J die Reine und Angewandte Mathematik, 1882, 92:156-171.
[32]	GREENWOOD J A, WILLIAMSON J B P. Contact of nominally flat surfaces[J]. Proceedings of the Royal Society of London, 1966, 295(295):300-319.
[33]	PERSSON B N, ALBOHR O, CRETON C, et al. Contact area between a viscoelastic solid and a hard, randomly rough, substrate[J]. Journal of Chemical Physics, 2004, 120(18):8779-8793.
[34]	ABBOTT E J, FIRESTONE F A. Specifying surface quality method based on accurate measurement and comparison[J]. Mechanlical Engineers, 1933, 55:569-572.
[35]	PULLEN J, WILLIAMSON J B P. On the plastic contact of rough surfaces[J]. Proceedings of the Royal Society A, 1972, 327(1569):159-173.
[36]	CHANG W R, ETSION I, BOGY D B. An elastic-plastic model for the contact of rough surfaces[J]. Journal of Tribology, 1987, 109(2):257-263.
[37]	赵永武, 吕彦明, 蒋建忠. 新的粗糙表面弹塑性接触模型[J]. 机械工程学报, 2007, 43(3):95-101. ZHAO Y W, LÜ Y M, JIANG J Z. New elastic-plastic model for the contact of rouch surfaces[J]. Journal of Mechanical Engineering, 2007, 43(3):95-101.
[38]	MAJUMDER A, BHUSHAN B. Role of fractal geometry in roughness characterization and contact mechanics of surfaces[J]. ASME Journal of Tribology, 1990, 112:205-216.
[39]	贺林, 朱均. 粗糙表面接触分形模型的提出与发展[J]. 摩擦学学报, 1996, 16(4):375-384. HE L, ZHU J. Fractal model for contact of rough surfaces[J]. Journal of Tribology, 1996, 16(4):375-384.
[40]	WANG S, KOMVOPOULOS K. A fractal theory of the interfacial temperature distribution in the slow sliding regime (Ⅱ):Multiple domains, elastoplastic contacts and applications[J]. Journal of Tribology, 1994, 116(4):824-832.
[41]	朱育权, 马保吉, 姜凌彦. 粗糙表面接触的弹性、弹塑性、塑性分形模型[J]. 西安工业大学学报, 2001, 21(2):150-157. ZHU Y Q, MA B J, JIANG L Y. The elastic elastoplastic and plastic fractal contact models for rough surface[J]. Journal of Xi'an University of Technology, 2001, 21(2):150-157.
[42]	田红亮, 钟先友, 秦红玲, 等.依据各向异性分形几何理论的固定结合部法向接触力学模型[J]. 机械工程学报, 2013, 49(21):108-122. TIAN H L, ZHONG X Y, QIN H L, et al. Normal contact mechanics model of fixed joint interface adopting anisotropic fractal geometrical theory[J]. Journal of Mechanical Engineering, 2013, 49(21):108-122.
[43]	兰国生, 张学良, 丁红钦, 等. 基于分形理论的结合面静摩擦因数改进模型[J]. 农业机械学报, 2012, 43(1):213-218. LAN G S, ZHANG X L, DING H Q, et al. Modified model of static friction coefficient of joint interfaces based on fractal theory[J]. Journal of Agricultural Machinery, 2012, 43(1):213-218.
[44]	缪小梅, 黄筱调, 袁鸿. 考虑微凸体弹塑性变形的结合面分形接触模型[J]. 农业机械学报, 2013, 44(1):248-252. MIAO X M, HUANG X D, YUAN H. Fractal contact model of joint interfaces considering elastic-plastic deformation of asperities[J]. Journal of Agricultural Machinery, 2013, 44(1):248-252.
[45]	丁雪兴, 严如奇, 贾永磊.基于基底长度的粗糙表面分形接触模型的构建与分析[J]. 摩擦学学报, 2014, 34(4):341-347. DING X X, YAN R Q, JIA Y L. Construction and analysis of fractal contact mechanics model for rough surface based on base length[J]. Journal of Tribology, 2014, 34(4):341-347.
[46]	MORAG Y, ETSION I. Resolving the contradiction of asperities plastic to elastic mode transition in current contact models of fractal rough surfaces[J]. Wear, 2007, 262(5/6):624-629.
[47]	杨红平, 傅卫平, 王雯, 等.基于分形几何与接触力学理论的结合面法向接触刚度计算模型[J]. 机械工程学报, 2013, 49(1):102-107. YANG H P, FU W P, WANG W, et al. Calculation model of the normal contact stiffness of joints based on the fractal geometry and contact theory[J]. Journal of Mechanical Engineering, 2013, 49(1):102-107.
[48]	成雨, 原园, 甘立, 等. 尺度相关的分形粗糙表面弹塑性接触力学模型[J]. 西北工业大学学报, 2016, 34(3):485-492. CHENG Y, YUAN Y, GAN L, et al. The elastic-plastic contact mechanics model related scale of rough surface[J]. Journal of Northwestern Polytechnical University, 2016, 34(3):485-492.
[49]	金守峰, 宿月文, 郭彩霞. 三维分形粗糙表面的修正接触模型[J]. 中国机械工程, 2012, 23(19):2316-2319. JIN S F, SU Y W, GUO C X. Revised contact model among three dimensional fractal rough surfaces[J]. China Mechanical Engineering, 2012, 23(19):2316-2319.
[50]	PERSSON B N, ALBOHR O, TARTAGLINO U, et al. On the nature of surface roughness with application to contact mechanics, sealing, rubber friction and adhesion[J]. Journal of Physics Condensed Matter, 2005, 17(1):R1-R62.
[51]	PERSSON B N J, YANG C. Theory of the leak-rate of seals[J]. Journal of Physics:Condensed Matter, 2008, 20(31):1959-1964.
[52]	LORENZ B, PERSSON B N J. Leak rate of seals:comparison of theory with experiment[J]. EPL (Europhysics Letters), 2009, 86(4):44006.
[53]	LORENZ B, PERSSON B N J. On the dependence of the leak-rate of seals on the skewness of the surface height probability distribution[J]. Europhysics Letters, 2010, 90(3):38002.
[54]	DAPP W B, LUCKE A, ERSSON B N, et al. Self-affine elastic contacts:percolation and leakage[J]. Physical Review Letters, 2013, 108(24):244301.
[55]	BOTTIGLIONE F, CARBONE G, MANGIALARDI L, et al. Leakage mechanism in flat seals[J]. Journal of Applied Physics, 2009, 106(10):104902.
[56]	HUNT A G. Percolation Theory for Flow in Porous Media[M]. Berlin:Springer, 2005.
[57]	张超. 考虑多尺度效应的接触理论及其在密封中的应用[D]. 长沙:国防科学技术大学, 2014. ZHANG C. Multi-scale contact mechanics and its application in sealing[D]. Changsha:National University of Defense Technology, 2014.
[58]	包超英, 孟祥铠, 李纪云, 等. 基于渗流原理的液体润滑机械密封的泄漏率研究[J]. 流体机械, 2014, (11):24-28. BAO C Y, MENG X K, LI J Y, et al. Study on leakage rate of liquid lubricated mechanical seal based on percolation theory[J]. Fluid Machinery, 2014, (11):24-28.
[59]	包超英, 孟祥铠, 李纪云, 等. 基于多孔介质模型的机械密封静压泄漏特性分析[J]. 润滑与密封, 2015, 40(3):57-63. BAO C Y, MENG X K, LI J Y, et al. The leakage performance analysis of mechanical seals under hydrostatic pressures based on porous media model[J]. Lubrication and Seal, 2015, 40(3):57-63.
[60]	史建成. 基于逾渗理论的静密封建模方法与泄漏机理研究[D]. 北京:北京理工大学, 2015. SHI J C. Research on modeling and mechanism of static sealing based on percolation theory[D]. Beijing:Beijing Institute of Technology, 2015
[61]	YU Q P, SUN J J, YU B, et al. A fractal model of mechanical seal surfaces based on accelerating experiment[J]. Tribology Transactions, 2017, 60(2):313-323.
[62]	SUN J J, GU B Q, WEI L. Leakage model of contacting mechanical seal based on fractal geometry theory[J]. Journal of Chemical Industry & Engineering, 2006, 57(7):1626-1631.
[63]	魏龙, 顾伯勤, 刘其和, 等. 机械密封摩擦副端面接触分形模型的修正[J]. 化工学报, 2013, 64(5):1723-1729. WEI L, GU B Q, LIU Q H, et al. Correction of contact fractal model for friction faces of mechanical seals[J]. CIESC Journal, 2013, 64(5):1723-1729.
[64]	房桂芳, 滕文锐, 刘其和, 等. 机械密封端面黏着磨损分形模型[J]. 流体机械, 2013, 41(1):35-40. FANG G F, TENG W R, LIU Q H, et al. Adhesive wear fractal model for end face of mechanical seals[J]. Fluid Machinery, 2013, 41(1):35-40.
[65]	黄永光, 刘世炳, 陈涛, 等. 基于微通道构型的微流体流动控制研究[J]. 力学进展, 2009, 39(1):69-78. HUANG Y G, LIU S B, CHEN T, et al. Studies on microfluid flowcontrols based on the configuration of microchannel[J]. Advances in Mechanics, 2009, 39(1):69-78.
[66]	CHU J C, TENG J T, XU T T, et al. Characterization of frictional pressure drop of liquid flow through curved rectangular microchannels[J]. Experimental Thermal & Fluid Science, 2012, 38(4):171-183.
[67]	田兴旺, 王平, 徐士鸣.颗粒堆积多孔介质内幂律流体的流动阻力特性[J]. 哈尔滨工业大学学报, 2017, 49(1):126-132. TIAN X W, WANG P, XU S M. Flow resistance characteristics of power law fluid flow throughgranular porous medium[J]. Journal of Harbin Institute of Technology, 2017, 49(1):126-132.
[68]	YUN M J, YUE Y, YU B, et al. A geometrical model for tortuosity of tortuous streamlines in porous media with cylindrical particles[J]. Chinese Physics Letters, 2010, 27(10):153-156.
[69]	吴金随. 多孔介质里流动阻力分析[D]. 武汉:华中科技大学, 2006. WU J S. Analysis of resistance for flow through porous media[D]. Wuhan:Huazhong University of Science and Technology, 2006.
[70]	鲁进利, 周宾, 许忠林, 等.不同截面微通道中流动阻力特性[J]. 东南大学学报(自然科学版), 2011, 41(3):554-557. LU J L, ZHOU B, XU Z L, et al. Flow characteristics in microchannel with different cross-section[J]. Journal of Southeast University (Natural Science Edition), 2011, 41(3):554-557.
[71]	王俊峰. 逾渗模型的蒙特卡罗研究[D]. 合肥:中国科学技术大学, 2013. WANG J F. Research on percolation models based on Monte Carlo simulation[D]. Hefei:University of Science and Technology of China, 2013.