化工学报 ›› 2017, Vol. 68 ›› Issue (7): 2918-2924.DOI: 10.11949/j.issn.0438-1157.20170096

• 材料化学工程与纳米技术 • 上一篇    下一篇

法国梧桐枯叶基活性炭的制备及其在超级电容器中的应用

周王帆1, 陈新1,2, 曹红亮1, 王海燕1, 赵仰之1, 贾晓博1, 王曼1   

  1. 1 华东理工大学材料科学与工程学院, 超细材料制备与应用教育部重点实验室, 上海市先进聚合物材料重点实验室, 上海 200237;
    2 中国科学院上海微系统与信息技术研究所信息功能材料国家重点实验室, 上海 200050
  • 收稿日期:2017-01-20 修回日期:2017-04-17 出版日期:2017-07-05 发布日期:2017-07-05
  • 通讯作者: 陈新
  • 基金资助:

    上海市重点学科和重点实验室项目(B502,08DZ2230500)。

Preparation of platanus leaf-based activated carbon and its application to supercapacitors

ZHOU Wangfan1, CHEN Xin1,2, CAO Hongliang1, WANG Haiyan1, ZHAO Yangzhi1, JIA Xiaobo1, WANG Man1   

  1. 1 Key Laboratory for Ultrafine Materials of Ministry of Education, Shanghai Key Laboratory of Advanced Polymeric Materials, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237, China;
    2 State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China
  • Received:2017-01-20 Revised:2017-04-17 Online:2017-07-05 Published:2017-07-05
  • Contact: 10.11949/j.issn.0438-1157.20170096
  • Supported by:

    supported by the Project of Shanghai Key Disciplines and Key Laboratories (B502, 08DZ2230500).

摘要:

以生物质法国梧桐枯叶为原料,将炭化的枯叶通过KOH化学活化处理,制备法国梧桐枯叶基活性炭(PLAC)。采用扫描电子显微镜(SEM)、X射线能量色散谱(EDS)、X射线光电子能谱(XPS)、傅里叶变换红外光谱(FTIR)、氮气吸脱附对法国梧桐基枯叶活性炭的形貌、成分、比表面积、孔径分布等进行表征;运用三电极电化学体系,通过循环伏安,恒流充放电,循环稳定性测试,电化学阻抗谱分析法国梧桐枯叶基活性炭的超级电容器电极性能。结果显示,在800℃下碳化,通过KOH活化处理的法国梧桐基活性炭制备的电极,在1 A·g-1电流密度下,比电容达到266 F·g-1。电极在5 A·g-1的电流密度下循环2000次后,比容量仍保留 97.0%,展示出良好的电极性能。

关键词: 生物质, 活性炭, 电化学, 法国梧桐, 超级电容器, 电极材料

Abstract:

Platanus leaf-based activated carbon (PLAC) was synthesized through high temperature carbonization and KOH chemical activation, using dry platanus leaves as raw materials. Scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and nitrogen adsorption-desorption techniques were used to characterize the morphology, composition, specific surface area and pore size distribution of the PLAC. The cyclic voltammetric (CV), galvanostatic charge/discharge (GCD) and electrochemical impedance spectroscopy (EIS) characterizations were performed with a three electrode electrochemical system, to study the supercapacitor electrode performance of the PLAC. The result shows that the PLAC electrode obtained under 800℃ carbonization and KOH chemical activation has specific capacitance of 266 F·g-1 at 1 A·g-1, and it can remain 97.0% of the initial capacitance after 2000 cycles at 5 A·g-1, demonstrating good electrode properties.

Key words: biomass, activated carbon, electrochemistry, platanus, supercapacitor, electrode material

中图分类号: